Results 1 to 3 of 3

Help! SES Code P0410 (PCM) Secondary Air Injection System

This is a discussion on Help! SES Code P0410 (PCM) Secondary Air Injection System within the General Help forums, part of the LSx Technical Help Section category; I added a SLP lid two weeks ago and everything looks OK so I am open to any suggestions from ...

  1. #1
    Junior Member
    Join Date
    Sep 2006
    Location
    Wilmington, NC
    Age
    48
    Posts
    33

    Pewter
    2002 SS Camaro M6

    Help! SES Code P0410 (PCM) Secondary Air Injection System

    I added a SLP lid two weeks ago and everything looks OK so I am open to any suggestions from the gurus. Thanks.

  2. #2
    Senior Member
    Join Date
    Jul 2005
    Location
    Jacksonville, FL
    Posts
    2,725
    Lid shouldn't have anything to do with it, unless you kinked the air hose or something, think that's a different code though - look it up at gearchatter.com
    Last edited by 2001NBMZ28; 10-02-2006 at 03:30 PM.

  3. #3
    Junior Member
    Join Date
    Sep 2006
    Location
    Wilmington, NC
    Age
    48
    Posts
    33

    Pewter
    2002 SS Camaro M6

    I did a Google for this code and some mentioned that the MAF can also cause this code. Some said that driving through standing water will also cause this due to its location on the car. We did have a very hard rain a couple of weeks ago and I did have to drive through several deep areas back and forth from work. I basically drove slowly through this in first gear at idle speed. The AP fuse checked out OK but how can I check the AP relay?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •