Results 1 to 3 of 3

help me please

This is a discussion on help me please within the General Help forums, part of the LSx Technical Help Section category; i have a 98 vette ,trying to put headers on. i need to remove the oil fill neck, the plastic ...

  1. #1
    Junior Member
    Join Date
    Aug 2006
    Location
    adams
    Age
    62
    Posts
    1

    white
    1998 c5 corvette

    help me please

    i have a 98 vette ,trying to put headers on. i need to remove the oil fill neck, the plastic neck that holds the oil cap. can't get it out. it s on the valve cover. i tryed pulling it out but only moves out a little then stops and it dose'nt turn out either. please help

  2. #2
    98 trans am F-Bomb's Avatar
    Join Date
    Aug 2006
    Location
    plano, Tx
    Posts
    517

    chameleon
    98 T/A

    i thought you could go from the bottom easier. it was slightly easier for me to go from the bottom but no matter which way you go it aint no simple task. i also belive the neck can only be removed from the inside if the cover

  3. #3
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,468

    98 Formula
    06 duramax

    The drivers side goes in from the bottom and the passenger in from the top. You'll have to pull the valve cover off to slip it in. Check the write up out at LS1howto.com.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •