front fender replacement

**Siciliano15** · 03-17-2009, 07:08 AM

are there any tricks in removing the front passenger side fender? mine is cracked so i am going to replace it with a new one. i see some bolts in the engine compartment. are there any other hidden bolts that i have to remove? also, how is the fender connected to the front bumper? '98 trans am

**Siciliano15** · 03-18-2009, 05:18 AM

bump........

**Quik** · 03-18-2009, 05:28 AM

if like a camaro. there are 3 vertical studs by the marker light on the nose cover, there is 1 stud down under the area of headlight. 4 bolts in engine bay, 1 by the mirror and 1 by the door which you hae to reach inside from wheelwell, 2 at bottom of rocker

all 10mm, again this is if its like a camaro

**Siciliano15** · 03-18-2009, 06:46 AM

Originally Posted by Quik

if like a camaro. there are 3 vertical studs by the marker light on the nose cover, there is 1 stud down under the area of headlight. 4 bolts in engine bay, 1 by the mirror and 1 by the door which you hae to reach inside from wheelwell, 2 at bottom of rocker

all 10mm, again this is if its like a camaro

thanks for the help...... the 3 vertical studs that connect to the nose..... are those accessable from underneath the car or does the wheel well liner need to be removed?

**Quik** · 03-18-2009, 06:48 AM

Originally Posted by Siciliano15

thanks for the help...... the 3 vertical studs that connect to the nose..... are those accessable from underneath the car or does the wheel well liner need to be removed?

inside the fender is how i reach mine. my inner liner is currently out so its easy to get to.