Results 1 to 3 of 3
-
10-13-2008, 05:04 PM #1
First oil results from Blackstone
What do you think?
http://www.bmtc.net/~cfhkmh02/D54886.pdf
-
10-13-2008, 05:36 PM #2
- Join Date
- Apr 2006
- Location
- Chowchilla CA
- Age
- 69
- Posts
- 287
White- 2001 Z28
Looking good! Low wear and clean. You might try experimenting with different oils to see what works best for your motor. I have used RP( Sucks )Valvoline Synpower (Good) Quaker State High Horsepower ( Good ) Pennzoil Platinum ( Best so far ), and now I am trying Amsoil Signature Series 0-30 ( Expensive! ).
You might want to use 10/30 as opposed to 5/30
What oil filter were you using?
You can check my results and post your own on the UOA sticky. Science beats hype!
Sarge is the oil guru on this site, he probably has more to add.
-
10-14-2008, 03:05 PM #3
I run a wix filter. I was looking to extend my oil change interval from 3000 to 5000 miles, which is about as far as I drive the car in the summer. It sits in storage during the winter.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
My Used Oil Analysis From Blackstone
By Naaman in forum Internal EngineReplies: 2Last Post: 08-27-2016, 07:35 AM -
Anyone Dynomat Their Z? results?
By 5abivt in forum General HelpReplies: 3Last Post: 07-30-2009, 10:12 PM -
UFC 78's results
By AKIRA in forum Almost Anything GoesReplies: 67Last Post: 12-01-2007, 03:59 PM -
and the results are as follows!
By ninobrn99 in forum Western MembersReplies: 2Last Post: 09-24-2005, 03:04 PM
Bookmarks