Results 1 to 12 of 12

Engine Bay CLean up Mod

This is a discussion on Engine Bay CLean up Mod within the General Help forums, part of the LSx Technical Help Section category; I've been searching and haven't found it yet. If some one has the link saved pls post here. Also those ...

  1. #1
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Engine Bay CLean up Mod

    I've been searching and haven't found it yet.

    If some one has the link saved pls post here.

    Also those that have done it, how long does it take? A couple of hrs?

  2. #2
    Member Young11b's Avatar
    Join Date
    Jul 2010
    Location
    MI
    Posts
    156

    White
    2000 Pontiac Trans Am

    If you have it... pics?

  3. #3
    Member youngrigo's Avatar
    Join Date
    Nov 2010
    Location
    Bay Area, CA
    Posts
    247

    Black
    2000 SS

    Do you mean like relocating your cruise control unit and running the wires under the wheel well?
    1967 Camaro - LS1 T56 project
    2003 Z06 - Procharged and LTs
    2001 Honda Civic EX - DD
    2005 Kawaski KFX400
    2000 Camaro SS m6 - 523rwhp 468rwtq - (Sold)

  4. #4
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    No, the one that moves the wiring on the passenger side of the bay to under the the passenger wheel well.

  5. #5
    Member youngrigo's Avatar
    Join Date
    Nov 2010
    Location
    Bay Area, CA
    Posts
    247

    Black
    2000 SS

    Let me see if i can find some pics for you... I have done that mod before on a friends car and came out real nice

  6. #6

  7. #7
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    that's it. thx



    Have you done this yet?

  8. #8
    Member
    Join Date
    Aug 2005
    Location
    Urbandale, IA
    Posts
    149

    Red
    2002 Trans Am WS6 (M6)

    The only other thing I did was add a rubber grommet to the hole I cut. It's part# omar-2875 from cableorganizer dot com. I'm sure you can get one somewhere else but it fits perfectly and you won't have to worry about the sharp edges from the cut causing any other problems.

  9. #9
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    Quote Originally Posted by OhTwo View Post
    The only other thing I did was add a rubber grommet to the hole I cut. It's part# omar-2875 from cableorganizer dot com. I'm sure you can get one somewhere else but it fits perfectly and you won't have to worry about the sharp edges from the cut causing any other problems.
    Thats a good idea. I filed the edges and since the cables are covered with wire loom they are protected.

  10. #10
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    Quote Originally Posted by SMWS6TA View Post
    that's it. thx



    Have you done this yet?
    yes


  11. #11
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Damn looking yours now I want to do this so badly now.


    Did it take long? Looks like a 2 hr job.

    Where you get the Mobile 1 plaque?




    I spy the same catch can as me

  12. #12
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    Quote Originally Posted by SMWS6TA View Post
    Damn looking yours now I want to do this so badly now.


    Did it take long? Looks like a 2 hr job.

    Where you get the Mobile 1 plaque?




    I spy the same catch can as me
    It took me about 1hr with the whole taping and drilling.
    Make sure you buy good tape. I like the 3M brand. Same thing for the velcro, get some good quality one. I bought the mobil 1 plate from ebay. it was like 25 bucks.

    No, my catch can is more awesome than yours lol. Well we both have 98's.
    Last edited by JayTA98; 05-15-2011 at 09:18 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question: Clean Engine
    By Heavyvette in forum Corvette
    Replies: 6
    Last Post: 01-24-2012, 05:41 PM
  2. Engine Bay CLean up Mod
    By SMWS6TA in forum Appearance Section
    Replies: 2
    Last Post: 05-15-2011, 01:20 PM
  3. help ts|s clean up his engine
    By third_shift|studios in forum Showcar and Detailing
    Replies: 19
    Last Post: 05-02-2008, 07:15 AM
  4. Replies: 0
    Last Post: 06-01-2007, 11:00 AM
  5. Replies: 0
    Last Post: 04-24-2007, 02:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •