Results 1 to 3 of 3
Thread: Drive shaft breaking? too weak??
-
07-30-2007, 03:01 PM #1
- Join Date
- Jul 2007
- Location
- Southeast Texas
- Posts
- 84
Black- 96 Z28Ttops, 98 Z28 Conv.
Drive shaft breaking? too weak??
Will my drive shaft be too weak for this setup: 383 lt1 224/230 cam, and (stock)ported - polished heads with my intake port-matched, with 3:73 rear with 3200 stall, and headers, (400 rwhp)..... will i need to replace the drive shaft or what? Thanks guys
-
07-30-2007, 03:16 PM #2
- Join Date
- Mar 2007
- Location
- homer glen il
- Posts
- 65
silver- 1998 bmw z3
I would be more worried about your axles those will be first to break its no fun chasin your wheel down the street with the axle still attached.Ive busted 8 ,7.5" rear ends already within 8 years.
-
07-30-2007, 03:19 PM #3
- Join Date
- Jul 2007
- Location
- Southeast Texas
- Posts
- 84
Black- 96 Z28Ttops, 98 Z28 Conv.
been there done that, no fun at all bro...But with this 3:73 Ford 9" i should have no worries...my next concern is my drive shaft and crank..along with the crank, you guys think even if i had the stock 3:23 (im pretty sure the 96' z28s came stock with these)..wouldnt handle my power along with the drive shaft, what should my main concerns be??? opinions welcomed !!! PLEASE ha..thanksLast edited by NightRiderZ; 07-30-2007 at 03:36 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: drive shaft
By sjohnson904 in forum DrivetrainReplies: 0Last Post: 05-20-2013, 09:19 AM -
Help: No reverse, weak shift into Drive
By engineer1984 in forum Automatic TransmissionReplies: 8Last Post: 05-25-2010, 01:09 PM -
Question: Counter shaft breaking??
By IZNUTHN in forum Manual TransmissionReplies: 1Last Post: 09-22-2008, 06:17 AM -
Drive Shaft not going in!!!!!!
By nmmccasland in forum Manual TransmissionReplies: 3Last Post: 06-11-2008, 11:24 AM -
Drive Shaft
By stevenm357 in forum DrivetrainReplies: 6Last Post: 03-04-2008, 08:42 AM
Bookmarks