Do anyone know anyone that repairs B&M shifters?

[Street Fighter]

I have a quick silver shifter that half of the time want up shift once you down shift it and try to shift it from low back to drive,nothing wrong with the cable adjusted right, have been in the truck about 7 years.also took the one out of my 77 Camaro and it worked like it should installed in my truck . need help.Don't want to buy a new one if this one can be fixed.

[sjgreen6]

Summit and Jegs carry repair parts for the B&M Shifters. B&M does rebuild work but usually charge a flat fee regardless of what needs done, look up there phone number on their web site. I noticed on a couple of forums there were complaints like yours and it was related to one of the springs on the driver's side falling out. Usually solved by opening up the shifter and putting the spring back in place. Good luck. Assuming you have a 4 speed Quick Silver I found the install directions on the B&M site here http://files.dpbrands.com/bm/instructions/80683.pdf if that is not what you have, all of the other guides are listed here http://www.bmracing.com/downloads/

Good luck