Results 1 to 12 of 12
-
05-20-2006, 06:16 AM #194controllerGuest
Changing old turn signals to new ones!! HELP!!!
I just bought some new black housing turn signal lights and well my dad and i just cant figure out how to get the old ones out!! They just wont come out of their little holding place!! Any info on how to get the old ones out and the new ones in would be awesome!! thanks
-
05-20-2006, 06:16 AM #294controllerGuest
Ohh and this is for my 2002 Camaro V6....sorry!!
-
05-20-2006, 06:19 AM #3
- Join Date
- Nov 2005
- Location
- Lost in Texas
- Age
- 40
- Posts
- 2,683
Custom Slate Blue- 99 B4C
there are two plastic wing nuts on the back side of each. You'll need to pull the plastic moulding from over the spare tire and off of the other side also. Then pull the carpet back and have at it. you can get the pass side without loosening the spare tire, but it will make it alot easier if you do loosen it.
-
05-20-2006, 06:24 AM #494controllerGuest
My bad man...i meant the front turn signals....those big ass orange ugly things!! Like we disconnected all the lights and screws and stuff but it still just wont come out!! The part of the light that is closest to the wheel...the thinnest part of the light....wont come out because it is caught behind this lil piece of some shit and just wont budge!! And it seems like the thickest part of the light hits the top of the bumper....where the headlight is...that little part of bumper sticking out in front of the head light!!
-
05-20-2006, 06:26 AM #5
- Join Date
- Nov 2005
- Location
- Lost in Texas
- Age
- 40
- Posts
- 2,683
Custom Slate Blue- 99 B4C
hm, can't help you with the fronts, it's been too long. Mine were easy when I did them though. Now that i re-read you post, I should have known it was the fronts anyways. Sorry I can't help, I jsut don't remember there being any particular trick to it when I did it
-
05-20-2006, 07:30 AM #6
You have to take out the head lights and than you will see the bolt that holds it in.
-
05-20-2006, 07:32 AM #7
- Join Date
- Nov 2005
- Location
- Lost in Texas
- Age
- 40
- Posts
- 2,683
Custom Slate Blue- 99 B4C
I just dropped the plastic piece on the bottom and went from under
-
05-20-2006, 03:02 PM #894controllerGuest
Well we took the bolts off the plastic piece so we could see it from underneath!! It like if your looking at the driver side lights from under the car where that lil flap comes down...the light is caught right behind this lil piece...i dont even know what the piece is!! And we cant move the light to the right enough to get the light out!! Maybe ill take some pics for you yall to see what im talkin about!!
-
05-20-2006, 03:25 PM #994controllerGuest
Pics
Here are some pics of the driver side turn signal that my dad and i just cant get out....its caught behind that dang whatever it is!!
-
05-20-2006, 03:27 PM #1094controllerGuest
more pics
Here are some more pics!!!
-
05-21-2006, 05:07 AM #11
Did mine had to just pry it a round it. it will come out just pry it by
-
05-21-2006, 04:34 PM #12
- Join Date
- May 2006
- Location
- England but from TX
- Posts
- 803
Light Pewter Metallic- 2K Camaro Z28
Where did you get the euro black housing turn signals? I've look everywhere they sell them and I can't find them.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Turn Signals
By bb4ninja in forum General HelpReplies: 14Last Post: 04-16-2008, 04:17 PM -
Help: turn signals
By joker in forum Stereo and ElectronicsReplies: 2Last Post: 04-12-2008, 12:18 PM -
how do u take out the turn signals ?
By Speedy_Gonzales in forum Appearance SectionReplies: 7Last Post: 10-27-2007, 12:43 PM -
Need both turn signals for 98-02 T/A
By mariner3302 in forum Parts Wanted / TradeReplies: 1Last Post: 09-17-2007, 09:05 PM -
no turn signals! need help!
By NIKDSC5 in forum CorvetteReplies: 12Last Post: 04-16-2007, 08:44 AM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks