big problem with header install...NEED HELP FAST!!!
This is a discussion on big problem with header install...NEED HELP FAST!!! within the General Help forums, part of the LSx Technical Help Section category; Well what everybody is getting at here is -this is a play it by ear situation.No 2 instances are going ...
02-12-2006, 04:06 PM #21
Well what everybody is getting at here is -this is a play it by ear situation.No 2 instances are going to have the same solution in this kind a thing.I'm thinkin take off the throttle body and look closely into the intake to start with.Probably going to have to take off the intake like was previously suggested.Mistakes happen in every shop-it's how you respond to them that separates the pro from the chump.If you think you've gotten all of it back out-take a compression reading and a leak-down test to assertain the extent of any possible valve damage.I saw a motor swallow a couple of little brass screws on this commercial truck-busted up a couple of spark plugs -but no other damage.2 new plugs and it was back on the road and never had another problem.But I looked at it very closely before sending it back out.
Last edited by 02z28ls1; 02-12-2006 at 04:10 PM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 2K T/A Driver in forum General HelpReplies: 7Last Post: 05-16-2006, 03:03 AM
By 99M6Z28 in forum External EngineReplies: 3Last Post: 02-12-2006, 06:04 AM
By 98redbird in forum External EngineReplies: 4Last Post: 01-27-2006, 07:37 PM
By NeeD4SpeeD in forum General HelpReplies: 12Last Post: 11-04-2005, 09:03 PM
By 02ZZ28 in forum Southern MembersReplies: 3Last Post: 09-15-2005, 02:29 AM