Results 1 to 8 of 8

Access to plug wires??

This is a discussion on Access to plug wires?? within the General Help forums, part of the LSx Technical Help Section category; What is the easiest way to access the 2 wires closest to the firewall on the passenger side? It's been ...

  1. #1
    Junior Member
    Join Date
    Aug 2005
    Location
    Fort Collins, Colorado
    Posts
    61

    White
    1999 Camaro SS

    Question Access to plug wires??

    What is the easiest way to access the 2 wires closest to the firewall on the passenger side? It's been a few years since I put in my iridium plugs and the took many hours and was a bear. I am finally getting some MSD wires and don't want to spend a whole day doing that.

    Thanks for any help/ideas.

    Jerry
    1999 Arctic White SS #462, ATI Procharger DS1, SLP Headers & Exhaust, 6M, BMR Subframe Connectors,Iridium Plugs Spec Stage 3 Clutch,Moser 12 bolt w/3.73's,Custom Cam,DRE Mustang Dyno 518.3hp @5900, rev limiter raised to 6700.

  2. #2
    Member lrader99's Avatar
    Join Date
    Nov 2005
    Location
    NW Georgia
    Age
    31
    Posts
    397

    flat black
    i normally go after #6 cyl from the top...and you can get #8 clear as day from underneath

  3. #3
    Life in the Fast lane sunsetorangess's Avatar
    Join Date
    Aug 2005
    Location
    Bragg NC
    Posts
    2,835

    Met. Sunset Orange
    01 SS

    Iv got lt's so either way works but i just put some wire protectors on and i did them all from the top, had too remove the egr pipe, but other than that it was pretty much straight forward...
    J
    2001 SS, Its not the car its the Driver that matters....

  4. #4
    Junior Member
    Join Date
    Aug 2005
    Location
    Fort Collins, Colorado
    Posts
    61

    White
    1999 Camaro SS

    Thumbs up

    Thanks for the information. I am getting her in the shop Saturday and might not have the wires by that time.

    Jerry

  5. #5
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,468

    98 Formula
    06 duramax

    You have to drop the tranny and pull the engine to access those 2 wires.



















































    j/k

  6. #6
    Member lrader99's Avatar
    Join Date
    Nov 2005
    Location
    NW Georgia
    Age
    31
    Posts
    397

    flat black
    Quote Originally Posted by 0rion View Post
    You have to drop the tranny and pull the engine to access those 2 wires.
    i was about to say....are you freakin kidding me....lol how bad would that suck if someone actually did drop the sub clip, you would be like this...

  7. #7
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,468

    98 Formula
    06 duramax

    Quote Originally Posted by lrader99 View Post
    i was about to say....are you freakin kidding me....lol how bad would that suck if someone actually did drop the sub clip, you would be like this...
    I'm just glad I forgot to add that the gas tank has to come out also.
    Jerry's 99SS, take the coil packs off on that side and life will be much easier.

  8. #8
    Member
    Join Date
    Aug 2006
    Location
    california
    Posts
    123

    allllllllll black
    2002 35th z28

    yes sir just remove all coil packs..mine come off all in one,,,but i do them 1 at a time...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •