AC clutch bearing
This is a discussion on AC clutch bearing within the General Help forums, part of the LSx Technical Help Section category; Hey, Wonder if anybody can post AC clutch removal prosedure, I couldn't find one. AC clutch bearing became noisy, looking ...
11-17-2009, 04:22 PM #1
AC clutch bearing
Wonder if anybody can post AC clutch removal prosedure, I couldn't find one.
AC clutch bearing became noisy, looking into replacing. Also does anybody know what GM vehicles got the same AC compressor clutch/pulley, it;s hard to find one from camaro/trans am in here.
98 Trans am
11-18-2009, 09:21 AM #2
Anybody? At least vehicles with the same compressor, I'll try to pull it apart and figure it out
03-03-2010, 08:44 PM #3
OK, noise gone, it appeared to be clutch end plate rubbing against clutch pulley. There was too small gap between them, so when disengaged, stationary end plate rub against rotating pulley. AC clutch comes apart really easy - you don't need to replace compressor if anything happens with your clutch as lots of ppl say. I managed to pull it apart with compressor still bolted on - just some wiggling around AC hose that is in front of the compressor. You need those AC clutch puller and installer which I borrowed for free in local parts store and I used 2jaw puller to remove pulley with bearing. Just FIY
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By x10-wakerider in forum Manual TransmissionReplies: 4Last Post: 07-13-2009, 05:16 PM
By marksls1ta in forum Sales and Group Purchases from our Great Sponsors!Replies: 10Last Post: 04-03-2009, 04:30 PM
By eddielb in forum Western MembersReplies: 2Last Post: 04-21-2008, 12:08 PM
By Ed Blown Vert in forum CorvetteReplies: 0Last Post: 02-07-2008, 09:30 PM
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 01-30-2007, 08:30 AM