Results 1 to 15 of 15
Thread: ABS module out!!
-
01-11-2011, 02:54 PM #1
ABS module out!!
my abs module is out, so i want to take the cluster off to remove the 3 lights that are on. how hard is it to remove or is it fairly easy? any thoughts will be helpful.
Bad A** LS1!!!
-
01-11-2011, 03:04 PM #2
why dont you replace the ebtcm?? you can ignore the lights, you just wont have abs or traction control
-
01-11-2011, 03:40 PM #3
a little expensive cant locate one under $600
-
01-11-2011, 03:58 PM #4
ah i c i c. that sucks, have you checked gmpartsdirect.com?
-
01-11-2011, 04:36 PM #5
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Mine has the sane problem. I hate those lights there.
I found em on eBay for like 80 dollars used00 ss blk m6 " STOCK" strano springs, slp bilstein shocks, adj LCA, adj panhard bar, relocation brackets, 2 point SFCs welded,OEM zo6 rims black, magnaflow exhaust, CME exhaust,E/cutout, slp grille, custom front plate mount, HIDs, whistler mod, side moldings delete, slp air lid, ported and polished TB, strut tower brace, 3.73s gears, and some other parts to list!
next to come,4.10s,ls7 clutch, ms3 or 228r cam, ported 243s, ls6 intake, ls6 oil pump. ls2 timing chain, longtube headers no cats, with a tune..
02 tahoe Z71 blacked out
00 jeep grand Cherokee limited on 22s.
07 Dodge Charger R/T Inferno Red, Sold
98 z28 red m6 sold
07 zx6r ninja flat/black sold
08 zx6r ninja sold
-
01-11-2011, 05:54 PM #6
I have the problem too, I wouldn't mind taking those lil lights off too
-
01-11-2011, 06:02 PM #7
Are you positive the module is no good? Just asking the obvious I know. Sure it isn't something like a bad wheel speed sensor or wiring issue?
-
01-11-2011, 09:54 PM #8
-
01-12-2011, 02:45 AM #9
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
This.
My ABS INOP and TCS INOP lights are on because I removed my stock 4-channel rear and replaced it with a Moser 9". I don't drive in the rain or snow, so I'm fine with that. I plan on removing the bulbs at some point. The problem is that you have to remove the vinyl cover the is over the lights, and you risk damaging it when you remove it.
Go to Autozone or someplace that does free scanning and have them scan you ECM for errors.
-
01-12-2011, 03:25 AM #10
Well me and pimplaps already had r ECM scanned by his boss and said that it's the ABS Madule
so we wanted to remove the lil light bulbs if it not that hard..
-
01-12-2011, 04:54 AM #11
Me and tury ls1 already checked, for sure the module is shot.
-
01-12-2011, 07:42 AM #12
Just curious, do you know what the code was? Have you checked ebay and all local junkyards for a replacement? I know those are expensive and most of us don't use traction control or ABS that often, if at all...however, ABS is nice to have in the event you ever get in a pinch and need it.
-
01-12-2011, 09:21 AM #13
I agree I figured I'd take the lights out for now till I replace the module. I hate having all them Damn lights on, my dash looks like a x-mas tree.
-
01-12-2011, 12:16 PM #14
- Join Date
- Mar 2009
- Location
- pompano beach florida
- Age
- 33
- Posts
- 1,008
- 2002 Camaro Z/28 Pewter
get one from ebay for like 80 used give or take i think they are 400 from gmpartsdirect. trust me tcs isnt a big deal but abs is nice to have my buddy said he'd get his done eventually then in november he needed abs while on the hwy it wasnt there and he smacked the sidewall at 40mphl just cost him almost 1k in damage so ya its iimportant
-
01-12-2011, 02:26 PM #15
That must have sucked ill look on eBay first then. Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: abs module 5.3
By Pete Rock98 in forum General HelpReplies: 0Last Post: 07-14-2011, 10:44 AM -
ecm module
By buickmanw in forum Classic MuscleReplies: 1Last Post: 09-30-2008, 12:52 PM -
For Sale: abs module,cruise module,water tem gauge
By sammy burks in forum Parts For Sale / TradeReplies: 5Last Post: 06-02-2008, 05:38 AM -
abs module
By 99pewterta in forum General HelpReplies: 6Last Post: 05-21-2008, 10:14 PM -
SLP IAT module?
By Ripper415 in forum External EngineReplies: 6Last Post: 10-30-2006, 10:12 AM
Bookmarks