Results 1 to 2 of 2

4th Gen ('02) Master Cylinder Info

This is a discussion on 4th Gen ('02) Master Cylinder Info within the General Help forums, part of the LSx Technical Help Section category; On a master cylinder for a 2002 f-body, are the forward and rearward ports for the front and rear brakes? ...

  1. #1
    Junior Member
    Join Date
    Dec 2005
    Location
    Edmonton, AB
    Posts
    1

    4th Gen ('02) Master Cylinder Info

    On a master cylinder for a 2002 f-body, are the forward and rearward
    ports for the front and rear brakes? Or is the orientation reversed
    - front port/rear brakes, rear port/front brakes?

    The m/c fittings are M10 and M12. Which fitting serves which end of
    the car.

    I believe the bore dia is 1" for '02. Is this correct and were there any
    other diameters used for 4 Gen cars?

    Is there a proportioning valve in the system?

    Thanks

    .

  2. #2
    Member SSpdDmon's Avatar
    Join Date
    May 2006
    Location
    Farmington, MI
    Age
    36
    Posts
    332

    SOM
    '01 Camaro SS

    I would assume the larger diameter fitting serves the front of the car as the front brakes do most of the stopping. Can't you follow the lines?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •