Results 1 to 9 of 9

2002 z28 stripper. stock 1/4 mile times

This is a discussion on 2002 z28 stripper. stock 1/4 mile times within the General Help forums, part of the LSx Technical Help Section category; -------------------------------------------------------------------------------- ive never ran my 02 z at the track yet but, ive been playing my g-tech and hptuners, and ...

  1. #1
    zrater
    Guest

    2002 z28 stripper. stock 1/4 mile times

    --------------------------------------------------------------------------------

    ive never ran my 02 z at the track yet but, ive been playing my g-tech
    and hptuners, and all ive done is, get the kr out of this thing and put a lid
    on and plugs wires and im seeing 13.7 at 104 mph with 273 gears its a
    02 stripper full tank of gas and me 3450lbs, my buddy is from the road
    runner days, he hasnt been to the track since. he say them numbers are BULLSHIT
    ive made these runs three diff nights humidity at 65 - 70 % intake at 110
    and spinning the first 10 feet seen on a graph and on the tar, i still think
    i could dial evan faster on a 50 degree night. what do guys have to
    say to my no it all friend. you think theses #s are about right for stock 2002.
    thanks a million.

  2. #2
    Member
    Join Date
    Aug 2005
    Location
    any where but here
    Posts
    142

    Close

    There not far off. The 104 MPH indicates around 300 RWHP & the 13.7 around 265 HP. I think stock for an SS is around 280 RWHP (340 HP @ the crank) so both numbers are close.

    A stock F-body I think is 305HP @ the crank & 250 @ the wheels. These are from memory & may be different, but, are close estimates.

  3. #3
    Member 1SSWFO's Avatar
    Join Date
    Aug 2005
    Location
    RIGHT BESIDE THE LEMON TREE IN HELL!!!
    Posts
    280

    LIGHT PEWTER METALIC
    1999 SS CAMARO

    sounds pretty close to me the only thing is the gearing is kinda too high for the times depending on where you are. sea level and all. my SS with borla catback and nothing else ran a 13.7@107 at Bristol which is about 2400 ft up I think and it has a 3.42 rear,but I would say its possible. the hptuners should be good for some extra ponys, and later with mods. good luck.

  4. #4
    Member
    Join Date
    Aug 2005
    Location
    Coatesville Pa
    Age
    35
    Posts
    67

    Blue
    2001 Pontiac Trans Am

    My ws6 m6 with a lid and a cat back ran 13.3 at 107mph at cecil county

  5. #5
    Got Rice? Liquifire's Avatar
    Join Date
    Aug 2005
    Location
    central wisconsin
    Age
    37
    Posts
    702
    these times and speeds all sound pretty realistic........your old school friend needs to do some more looking around and open his eyes to the LS1 ways......

  6. #6
    BlackHawk T/A
    Guest
    Quote Originally Posted by LS1-450
    There not far off. The 104 MPH indicates around 300 RWHP & the 13.7 around 265 HP. I think stock for an SS is around 280 RWHP (340 HP @ the crank) so both numbers are close.

    A stock F-body I think is 305HP @ the crank & 250 @ the wheels. These are from memory & may be different, but, are close estimates.
    Your numbers are way low man.

  7. #7
    ruff ruff rotwiler's Avatar
    Join Date
    Aug 2005
    Location
    WA State
    Age
    49
    Posts
    481

    LT's, 3400 stall, FIPK,CB
    2002 Z28

    My stock 02 A4 Z28 with 2:73's ran a 13.7 at 106. I added a Magnaflow catback and lid and ran 13.54, plus at that time added weight from SFC's and stb etc.. Then added 3:42's and ran 13.2. My car isn't a stripper. Has all the options and I'm almost 300 pounds. So to me your times seem right on.

  8. #8
    Junior Member Havoc_S's Avatar
    Join Date
    Aug 2005
    Location
    San Antonio
    Age
    36
    Posts
    82
    2002 Trans Am CE

    Does stripper just mean you did weight reduction on it?

  9. #9
    230,55,147 91Z28's Avatar
    Join Date
    Jul 2005
    Location
    Houston
    Age
    33
    Posts
    3,664

    Cyclone Grey Metallic
    2006 GTO

    A stock M6 should put 300 to rear wheels.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Members who have read this thread: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •