This is a discussion on 1998z28 within the General Help forums, part of the LSx Technical Help Section category; Any body noes how to remove an ls1 from the top any info will help thanks...
01-11-2010, 07:24 AM #1
- Join Date
- Jan 2010
- North Carolina
- 1998 z28
Any body noes how to remove an ls1 from the top any info will help thanks
01-11-2010, 08:09 AM #2
- Join Date
- Nov 1999
- over here...
D  V D
- 1999 trans am
i bet they do in the tech section...
01-11-2010, 08:53 AM #3
Get yourself a "happy hooker" from TPIS, then remove your intake manifold and bolt the plate to the existing bolts for the valley cover (I would suggest getting some longer ones). Make sure when you bolt it down the curved "arm" is pointed forward and fairly close to the cowl.02 Camaro
PRC Stg 2.5 5.3's, Futral F14, PP Typhoon intake, True duals, Performabuilt tranny, & 3500 convertor, HSW plate kit.
*Old Time* 10.90@ 125mph
01-12-2010, 06:37 PM #4
Its easier to pull it out the bottom. Get you some trusty jack stands and 2 good jacks.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By LETHALxLS1 in forum Parts Wanted / TradeReplies: 7Last Post: 07-26-2007, 09:46 AM