1998 PCV Pics?

**jim_usa** · 09-24-2005, 11:40 AM

Please post a pic of a 1998 PCV valve stock preferably so I can figure out where mine is. I want to replace it but can't find it.

I see the hose from the throttle body but it seems to go to the back of the motor without stopping.

Thanks!

**ss~zoso~ss** · 09-24-2005, 11:49 AM

i had the same problem, if you look on the driver's side wheel well hump under the hood, it should show a picture of the EGR /PCV system. the valve is on the passengers side under a foam clump, which you have to peel away to change it

**jim_usa** · 09-24-2005, 12:26 PM

Is it an in-line valve?

Because that clump of foam on mine has nothing coming out of it attached to the motor/intake. I can wrap my hand around it and it moves freely.

**iowahawk** · 05-05-2006, 04:43 AM

I've got a 98 Z28. I just replaced my PCV last week, with 77000 on it.
If you stand in front of the car, follow the black hose running from the lower left of the passenger side of the TB, along the top of the passenger valve cover. About the time you get a foot back, you'll see a very slight bulge. Very slight. Use a razor blade to cut into the bulge. Mine was/is in there.
But I have heard/read other posts that say the 98's PCV's were in various places, but generally in that hose, some farther back than others.

**jim_usa** · 05-05-2006, 06:23 PM

Thanks IOWAHAWK!!

**SeVeReDiStOrTiOn** · 05-06-2006, 08:17 AM

Man this is a old post.....anyway, you shouldn't need a razor blade to get the pcv out. Unless the 98 is completely different then the hose comes apart....then just grab the nipple on the valve and pull it out.