Results 1 to 2 of 2

1993 V6 camaro swap for Ls1

This is a discussion on 1993 V6 camaro swap for Ls1 within the General Help forums, part of the LSx Technical Help Section category; Ok I took out my V6 and put in an Ls1 and when I took the V6 wire harness out ...

  1. #1
    Junior Member
    Join Date
    Feb 2007
    Location
    Eastpointe
    Posts
    5

    red
    1993 camaro

    1993 V6 camaro swap for Ls1

    Ok I took out my V6 and put in an Ls1 and when I took the V6 wire harness out of the firewall the plugs were not the same on the Ls1 wire harness, so I can't plug in the Ls1 wire harness into the plugs from the V6 inside the car. What do I do?

  2. #2
    Junior Member
    Join Date
    Jan 2007
    Location
    Glendale az
    Age
    30
    Posts
    74
    if you swapped into the 93 then the wiring is probably different all around. You may have to change the harness inside the vehicle also... unless you feel like doing alot of hardwiring. For the sake of simplicity I would go with swapping the harnesses inside the car and maybe change your guage cluster if that won't work with the new harness. You could probably find these things in a junkyard for pretty cheap.

    If you do snag a harness from the junkyard, make sure you look it over really good and maybe spend some time on it with a continuity tester to save all the diag time later

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •