Results 1 to 11 of 11
Thread: Whats the best gear?
-
06-10-2010, 02:34 PM #1
Whats the best gear?
Well everytime i take it to a dyno guy my car will almost always get dynoed in 5th gear since my 4th is too short. Is this ok to do and is it accurate as to what your pulling to the wheels once the numbers pop up.
1993 Z28 M6: K&N Intake, 52mm TB, TB Bypass, No Cats, Exhaust Cutout, Flowmaster Muffler, 3.90 Gears, 160 Thermo, Tune, BMR Springs, Bilstein Shocks, 3 Point SFC,s & MGW Shifter.
-
06-10-2010, 03:15 PM #2
i thought it was done in 4th
-
06-10-2010, 04:18 PM #3
Thats what i thought to, ive heard you always do it in 4th as well. The only time i would think you would do it in 5th is short gearing and alot of power. My 93Z had to be done in 5th since the nitrous would make the car squirly in 4th.
-
06-12-2010, 12:37 PM #4
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
You need to dyno the 1:1 gear.
Which is 4th in the M6 and 3rd with the A4.
5th is an overdrive gear and isn't nearly as strong. I don't go WOT in 5th or 6th with my car.
Try some belt conditioner on the tires to see if that helps it getting all over the place.
-
06-12-2010, 02:33 PM #5
ya thats what i will do next time, my last dyno session was done in 5th gear so when i go back this time i will do it in 4th for sure.
-
06-16-2010, 08:18 PM #6
Good info since I'm having mine re-done on the 22nd.
-
06-16-2010, 08:28 PM #7
-
06-16-2010, 09:18 PM #8
If the car is getting squirrely on the dyno, tell the guy to put the purse down before cranking on the straps. I bet that will help also.
-
06-17-2010, 12:09 AM #9
-
06-18-2010, 12:34 PM #10
on my 93z it was terrible i had to have him put more straps to keep it on the dyno. As soon as the nitrous would hit the car would get squirly bad. On my 01Z28 isnt that bad he just said he wanted to do it in 5th because 4th is too short and it was moving around
-
06-19-2010, 07:16 AM #11
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Sticking in gear / not going into gear
By Dave-TransAm in forum V6Replies: 1Last Post: 08-17-2012, 01:56 AM -
Pro Gear ($900) vs SD Gear&Axle ($570)??
By Z28er in forum Western MembersReplies: 7Last Post: 04-29-2010, 07:47 AM -
whats the best gear for a 6 speed?
By Leeroyws6 in forum DrivetrainReplies: 13Last Post: 03-10-2010, 02:01 PM -
2002 Camaro ss a4 Help! redlines a gear then changes a gear from a roll please read!
By hmorris7000 in forum Camaro / SSReplies: 24Last Post: 06-05-2007, 03:01 PM -
2002 Camaro ss a4 Help! redlines a gear then changes a gear from a roll please read!
By hmorris7000 in forum General HelpReplies: 9Last Post: 06-01-2007, 05:18 PM
Bookmarks