Page 6 of 19 FirstFirst ... 2345678910 ... LastLast
Results 101 to 120 of 368

Post your Dyno numbers!!!

This is a discussion on Post your Dyno numbers!!! within the Dyno Information forums, part of the Racing Forums category; we re ran the twin turbo 427 with 100 octane unleaded pump gas and 14psi 2500 rpm - 551ft/lbs & ...

  1. #101
    Member Granatelli's Avatar
    Join Date
    Feb 2006
    Location
    Oxnard CA
    Posts
    206

    Yellow
    2015 Z06 Coming, 2014 Z51

    we re ran the twin turbo 427 with 100 octane unleaded pump gas and 14psi

    2500 rpm - 551ft/lbs & 264hp
    3000 rpm - 720ft/lbs & 411hp
    3500 rpm - 893ft/lbs & 595hp
    4000 rpm - 1026ft/lbs & 780hp
    4500 rpm - 1047ft/lbs & 899hp
    5000 rpm - 1019ft/lbs & 970hp
    5500 rpm - 904ft/lbs & 943.62

    peak power of 972 at 5100 and peak torque was 1057 at 4600

    This was blowing through the Granatelli MAF

    http://www.granatellimotorsports.com...MS-CORV.-2.jpg http://www.granatellimotorsports.com...MS-CORV.-5.jpg http://www.granatellimotorsports.com/vette/PB065247.jpg

    http://www.granatellimotorsports.com/pr091.htm
    Last edited by Granatelli; 06-12-2006 at 01:21 PM.

  2. #102
    Member Ramairgod's Avatar
    Join Date
    Sep 2005
    Location
    Spartanburg, SC
    Age
    33
    Posts
    122

    Red
    02 Pontiac Trans Am WS6

    324rwhp and 334ftlbs...IMO not too bad for the stuff listed in my sig.
    [COLOR=black]I Peddle Posters

  3. #103
    Evr sena bdgr killa snak? Roastem's Avatar
    Join Date
    Dec 2005
    Location
    Research Triangle Park, NC
    Age
    40
    Posts
    1,812

    Pewter
    '99 Z28 M6

    Quote Originally Posted by Granatelli
    we re ran the twin turbo 427 with 100 octane unleaded pump gas and 14psi

    2500 rpm - 551ft/lbs & 264hp
    3000 rpm - 720ft/lbs & 411hp
    3500 rpm - 893ft/lbs & 595hp
    4000 rpm - 1026ft/lbs & 780hp
    4500 rpm - 1047ft/lbs & 899hp
    5000 rpm - 1019ft/lbs & 970hp
    5500 rpm - 904ft/lbs & 943.62
    ooohhhhh.....ahhhhhhhhh

    The god of twin turbo 427's hath blessed thou.
    Last edited by Roastem; 06-15-2006 at 07:29 AM.

  4. #104
    Senior Member MadSeason's Avatar
    Join Date
    Aug 2005
    Location
    Indiana
    Age
    35
    Posts
    2,000
    1994 POS

    Quote Originally Posted by Granatelli
    we re ran the twin turbo 427 with 100 octane unleaded pump gas and 14psi

    2500 rpm - 551ft/lbs & 264hp
    3000 rpm - 720ft/lbs & 411hp
    3500 rpm - 893ft/lbs & 595hp
    4000 rpm - 1026ft/lbs & 780hp
    4500 rpm - 1047ft/lbs & 899hp
    5000 rpm - 1019ft/lbs & 970hp
    5500 rpm - 904ft/lbs & 943.62

    peak power of 972 at 5100 and peak torque was 1057 at 4600

    This was blowing through the Granatelli MAF

    http://www.granatellimotorsports.com...MS-CORV.-2.jpg http://www.granatellimotorsports.com...MS-CORV.-5.jpg http://www.granatellimotorsports.com/vette/PB065247.jpg

    http://www.granatellimotorsports.com/pr091.htm
    how did it do through other maf's tested?

  5. #105
    Adios and vaya con dios ZAPFOOL!!'s Avatar
    Join Date
    Nov 2005
    Location
    Gadsden, AL
    Age
    35
    Posts
    4,470

    Victory Red
    2002 Corvette Z06

    391 rwhp / 520 rwtq

    4# lower pulley
    bassani midpipes with highflow cats
    bassani catback
    JLP cold air intake

  6. #106
    Member Granatelli's Avatar
    Join Date
    Feb 2006
    Location
    Oxnard CA
    Posts
    206

    Yellow
    2015 Z06 Coming, 2014 Z51

    Quote Originally Posted by MadSeason
    how did it do through other maf's tested?

    I am sure it would be fine - it would come down to the calibration - we use EFI Live but still use the MAF - we have not converted this car to 2 bar

  7. #107
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    1999 TA A4, 297rwhp, 98F degrees outside, Garland TX (DFW area).
    Did it at the Intercrew Auto Salon, paid $50 for 3 pulls on dyno jet.

    Mods:
    Corsa exhaust catback, SLP cold air induction kit, SLP lid, K&B air filter, SLP smooth bellow, SLP 160 thermo, SLP MAF, HyperTech Prog 3.

    my cold air kit would have probably added another 4-5rwhp
    but there was no fan available. do you think my 297wrhp is low reading? what would my 1/4 time be?

    Thanks...


    Next intended mods:
    Bach progressive springs (lower 1 inch or 1.5), Cylinder Head and Cam AFR,
    get a professional done LS1Edit Tune after mods.

    ------

  8. #108
    Senior Member
    Join Date
    Sep 2005
    Location
    rochester,ny
    Age
    39
    Posts
    2,667

    pewter
    2001 z28 lingenfelter 383

    395 rwhp 399 lb ft tq, lingenfelter 383 package, just picked it up a few days ago

  9. #109
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    Newest chart....

    All Motor.
    I still want to get back and test it again. The motor was REALLY hot on that pull, and I want to double check my pushrod lengths. Might be a touch short.
    Last edited by Mr. Luos; 06-18-2006 at 01:28 PM.
    2008 Trailblazer SS
    Yank PTB3600, Kooks 1 7/8" LT's, 4" intake, E-fans, Magnaflow, Sonnax kit, tranny cooler, tune.
    Lowered, HID's, tinted.

    1999 Pontiac Trans Am WS.6 #1747 SOLD
    531.1 RWHP 481.3 FT/Pounds all motor.

  10. #110
    Junior Member
    Join Date
    Jun 2006
    Location
    houston
    Age
    44
    Posts
    45

    Lemans Blue
    06 Corvette

    2006 C6 A6 Tranny Bone stock, paper plates, 800 miles

    341.5 RWHP (347.9 if you count the spike around 5400 rpm on both pulls, but I don't)
    341.7 RWTQ


    very, very happy!

  11. #111
    Senior Member Hurley711's Avatar
    Join Date
    Jul 2005
    Location
    Earth
    Age
    41
    Posts
    3,362

    414 RWHP 395 RWTQ
    00 Black Ram Air Trans Am

    399 HP & 397 TQ.....mods in sig
    '00 Black Ram Air TA TR224/224 PRC 5.3 59cc Heads
    Pacesetter LT ORY Hooker CB 414 RWHP 395 RWTQ
    BMR PHR, SFC,LCA & TM. Bilstein HD shocks 1LE FSB
    Firehawk Rims w/KDW Custom Headrests & Floormats

  12. #112
    Junior Member
    Join Date
    Jun 2006
    Location
    New Mexico
    Posts
    9

    Silver
    2002 Trans Am WS6

    Dyno numbers before/after headers/catback

    Just got some exhaust goodies along with a pre/post dyno..
    The +26 rwtq along with the awesome sound was well worth the $$

    2002 T/A WS6 Vert
    SLP Lid

    Pre-Exhaust
    299.98 Rwhp SAE smooth 5
    314 Rwtq

    After installed:
    JETHOT LT
    JETHOT Y - with cats
    Magnaflow Catback
    328.78 Rwhp SAE smooth 5
    340 Rwtq


    No tune yet..
    Last edited by Beercan; 07-22-2006 at 06:09 PM.

  13. #113
    Junior Member littless's Avatar
    Join Date
    Mar 2006
    Location
    live oak texas
    Posts
    2

    navy blue metalic
    2001 camaro ss

    309rwhp 328rhtq stock 376rwhp 356rwtq after mods and stock tune
    Last edited by littless; 07-03-2006 at 07:17 AM.

  14. #114
    Junior Member
    Join Date
    Mar 2006
    Location
    TX
    Posts
    5

    Black
    1999 Corvette

    413 rwhp / 381 rwtq

  15. #115
    I'm out there so hide!!!! D!ck's Avatar
    Join Date
    Oct 2005
    Location
    TULSA, OK
    Posts
    1,140

    Black & Brilliant Silver
    1999&1997 SL600 6.0 V12's

    Quote Originally Posted by djvaly View Post
    1999 TA A4, 297rwhp, 98F degrees outside, Garland TX (DFW area).
    Did it at the Intercrew Auto Salon, paid $50 for 3 pulls on dyno jet.

    Mods:
    Corsa exhaust catback, SLP cold air induction kit, SLP lid, K&B air filter, SLP smooth bellow, SLP 160 thermo, SLP MAF, HyperTech Prog 3.

    my cold air kit would have probably added another 4-5rwhp
    but there was no fan available. do you think my 297wrhp is low reading? what would my 1/4 time be?

    Thanks...


    Next intended mods:
    Bach progressive springs (lower 1 inch or 1.5), Cylinder Head and Cam AFR,
    get a professional done LS1Edit Tune after mods.

    ------
    So what is the point of the hugely expensive SL600?

    Press your right foot down. To the backing of a mellow moan, the surroundings go into reverse and dots on the horizon zoom into focus. There is something special about a car that accelerates from 100 as fast as it accelerates to 100.

    Topgear

  16. #116
    Camaroholic 00'Z28's Avatar
    Join Date
    Sep 2005
    Location
    Central FL
    Age
    38
    Posts
    15

    Black/Red
    2000 Z28/1991 Z28

    2000 Z28 A4

    26K miles, TR55's, FRA, SLP lid, 2.73 gears, all else stock... 294HP/313 TQ in 2nd gear.


    72K miles, 3.42's, SY3500 stall, tune, Pacesetter LT's, TSP true duals, ported TB, GMPP wires, TR6's, LS6 intake, SLP lid, ASP pulley, FTRA, SLP smooth bellow, 160* t-stat. Final #'s 348/350 - added a little fuel and pulled some timing, best pull of 349/353 N/A. NX 100 shot @ 860 psi - 434/466.

    New combination - ???HP/???TQ Still not back together & running.

  17. #117
    friendly mustang member meanlx's Avatar
    Join Date
    Aug 2005
    Location
    NY
    Age
    45
    Posts
    65

    red
    '90 5.0 LX

    '90 5.0 Mustang LX w/ stock 302, h/c/i, novi 1000 blower, and SP boost cooler: 505rwhp/460rwtrq

  18. #118
    Wow, some of you guys have some big numbers

  19. #119
    Camaroholic 00'Z28's Avatar
    Join Date
    Sep 2005
    Location
    Central FL
    Age
    38
    Posts
    15

    Black/Red
    2000 Z28/1991 Z28

    Quote Originally Posted by D!ck View Post
    89 chevy silverado tbi bitches, 6k on engine and trans. 259rwhp and 365rwtq stop light killa and 20mpg!!!
    Are you willing to share your mods? I ask because I'm rebuilding a 350 for my 88' Silverado to replace the weak 305.

  20. #120
    Junior Member
    Join Date
    Nov 2005
    Location
    savannah
    Age
    33
    Posts
    6

    Red
    2000 WS6

    I have 2000 WS6
    SLP Lid,SLP MAf, BBK TB, LS6 intake, LTs cut out, MS3 cam, valve springs, retainers. hardend pushrods, and 4.10's. it put down
    415rwhp and 374rwtq and yea cam only!!!!
    2000 Trans Am WS6:SLP lid,SLP MAF,BBK 80mm TB,LT's, electric cutout,4.10's,LS1 Edit,short throw shifter,4 new pushrods

Page 6 of 19 FirstFirst ... 2345678910 ... LastLast

LinkBacks (?)

  1. 05-21-2013, 09:30 AM
  2. 11-11-2011, 01:22 PM
  3. 10-19-2011, 02:38 PM
  4. 09-06-2011, 08:45 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dyno numbers! Post 'em up!
    By FinZ28 in forum Almost Anything Goes
    Replies: 9
    Last Post: 05-09-2012, 11:10 AM
  2. First dyno numbers...
    By maxpit in forum Western Members
    Replies: 101
    Last Post: 10-29-2008, 09:14 AM
  3. Tr230 dyno numbers 98 heads=bad numbers?
    By phoenix1987 in forum Dyno Information
    Replies: 7
    Last Post: 09-11-2007, 09:33 AM
  4. New Dyno Numbers
    By JD_Z28 in forum Western Members
    Replies: 65
    Last Post: 04-04-2007, 09:04 PM
  5. DYNO numbers
    By Brad5150 in forum Firebird / WS6
    Replies: 2
    Last Post: 01-20-2007, 08:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •