Page 10 of 19 FirstFirst ... 67891011121314 ... LastLast
Results 181 to 200 of 368

Post your Dyno numbers!!!

This is a discussion on Post your Dyno numbers!!! within the Dyno Information forums, part of the Racing Forums category; 2000 Trans Am only mods: true duals(OR h pipe to 2 single chamber flowmasters) 300rwhp/321tq hope to get it higher ...

  1. #181
    Junior Member
    Join Date
    Oct 2006
    Location
    US
    Posts
    88
    2000 Trans Am only mods: true duals(OR h pipe to 2 single chamber flowmasters)

    300rwhp/321tq

    hope to get it higher with the LTs im getting soon

  2. #182
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    Quote Originally Posted by djvaly View Post
    your ws6 is 300-310rwhp stock. a T/A non ws6 would be 285-290rwhp stock.
    Negative. Both are about the same stock.
    A4 will dyno slightly lower than the M6 though.

    Quote Originally Posted by F&Ybodlover View Post
    Just wondering who has the highest NA bolt on only car on here?

    380 is the highest I've seen.
    380 RWHP out of a bolt-on car??? No way in hell.

  3. #183
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    Quote Originally Posted by Mr. Luos View Post
    Negative. Both are about the same stock.
    A4 will dyno slightly lower than the M6 though.


    380 RWHP out of a bolt-on car??? No way in hell.
    i dyno stock 290rwhp, while ws6 00-02 have ls6 intake, and ram air... i see most ws6 00-02 people claim 300-310rwhp

    also on the 380rwhp n/a question... I was at 368rwhp with almost full bolts on, but still on stock heads and cam... check my sig... so if i added heads/cam, my na setup would have been 400rwhp on a4.

    btw now i am on 402 motor, with supporting mods at 475rwhp... not bad for A4... 600 at crank...
    Last edited by djvaly; 03-07-2007 at 09:36 PM.

  4. #184
    Member F&Ybodlover's Avatar
    Join Date
    Sep 2006
    Location
    FL
    Posts
    139

    Black
    98 Trans Am

    Quote Originally Posted by Mr. Luos View Post

    380 RWHP out of a bolt-on car??? No way in hell.

    This was on an 00 6spd Vette.

    From what I remember... it had a Fast Intake, Full Bassani Exhaust, no cats, Vararam, Electric Pump, Pulley, free mods, LS1 edit, clutch &flywheel, etc. It was on also on a Dynojet. The Heads and cam were stock though.

  5. #185
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    I guess on a DynoJet it might get that high. That is more than the average bolt-on car, but it still qualifies.
    Impressive. I would like to see the chart if possible.


    DJ...You dyno'd right on for a stock A4 of any year. The 310'ish' numbers are from M6 cars of any year.
    Mine is a 1999. Catback and lid - 320/333
    Never did get a stock baseline.

    DJ...remember, I also have a 402.

  6. #186
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863

    Thumbs up

    Quote Originally Posted by Mr. Luos View Post
    I guess on a DynoJet it might get that high. That is more than the average bolt-on car, but it still qualifies.
    Impressive. I would like to see the chart if possible.


    DJ...You dyno'd right on for a stock A4 of any year. The 310'ish' numbers are from M6 cars of any year.
    Mine is a 1999. Catback and lid - 320/333
    Never did get a stock baseline.

    DJ...remember, I also have a 402.
    you putting 530rw on M6, god bless good number for 402 stroker...
    mine is undergoing the extensive tune and motor break in a bit for the last 2 days, they said 480rwhp is top and hapenning on the A4 on that 402, remember 3000 stall robs me 20rhwp and well 30rwhp because of A4 vs M6. but I gained good acceleration on 3.73 but yeah what a dyno day yesterday... that bish screams... it's like watching a baby being born, camera / action...
    http://s166.photobucket.com/albums/u118/DjValy

    I'll try to get some video on youtube.com as well...
    Last edited by djvaly; 03-08-2007 at 07:18 PM.

  7. #187
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    I am sure. You will LOVE it!!!

    We figured mine to be around 635 crank after putting the power down through the 4.11's and the 9".

  8. #188
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    good times mate!

  9. #189
    386HP 373TQ jwindbigler's Avatar
    Join Date
    Dec 2005
    Location
    San Diego...Michigan originally
    Age
    34
    Posts
    1,426

    Pewter
    1999 Trans Am 5.7L


  10. #190
    386HP 373TQ jwindbigler's Avatar
    Join Date
    Dec 2005
    Location
    San Diego...Michigan originally
    Age
    34
    Posts
    1,426

    Pewter
    1999 Trans Am 5.7L

    Damn good #'s man!!

  11. #191
    ArtistFormerlyKnownAsMac Silver Streak's Avatar
    Join Date
    Apr 2006
    Location
    Indianapolis, IN
    Posts
    4,845

    All Black
    83, 87, 02 All WS6 T/As

    Nice numbers! Hope I can hit those when I get a cam.....
    -Geno
    1983 Black WS6 "WindCharger"
    1987 Black WS6 "WS87"
    2002 Black WS6 "Silver Streak"
    Sold the other four f-bodies

  12. #192
    386HP 373TQ jwindbigler's Avatar
    Join Date
    Dec 2005
    Location
    San Diego...Michigan originally
    Age
    34
    Posts
    1,426

    Pewter
    1999 Trans Am 5.7L

    Quote Originally Posted by KITTvsKARR View Post
    Nice numbers! Hope I can hit those when I get a cam.....
    Without heads, you will be about where I am...give or take.

  13. #193
    ArtistFormerlyKnownAsMac Silver Streak's Avatar
    Join Date
    Apr 2006
    Location
    Indianapolis, IN
    Posts
    4,845

    All Black
    83, 87, 02 All WS6 T/As

    So 40hp/20tq is normal for a cam?

  14. #194
    386HP 373TQ jwindbigler's Avatar
    Join Date
    Dec 2005
    Location
    San Diego...Michigan originally
    Age
    34
    Posts
    1,426

    Pewter
    1999 Trans Am 5.7L

    Yeah...plus it helps to get the full potential out of the rest of your setup

  15. #195
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    475rwhp and 450tq, dynoed at LG Motorsports in Wylie TX. so A4 and stalled 3000, that i figure 600-610hp at crank with 18-20% loss.

  16. #196
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    I want to see the chart DJ!!!

  17. #197
    Slower Than a 3rd Gen juiced99ws6's Avatar
    Join Date
    Aug 2005
    Location
    Cape Coral, FL
    Age
    33
    Posts
    3,097

    Mystic Teal
    99 Trans Am & 01 CBR 929

    Quote Originally Posted by djvaly View Post
    475rwhp and 450tq, dynoed at LG Motorsports in Wylie TX. so A4 and stalled 3000, that i figure 600-610hp at crank with 18-20% loss.
    nice man, congrats.. After me and Tony get out of the field next month then I will have my car done that week and dyno tuned then hopefully we can all go up to Ennis and battle it out. I wanna see my lil stock cubed LS1 go up against a 402

  18. #198
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863

    Thumbs up

    Quote Originally Posted by Mr. Luos View Post
    I want to see the chart DJ!!!
    the pull before any tuning is here 468 or so rwhp and 400tq,
    http://s166.photobucket.com/albums/u118/DjValy

    I got one of the pulls chart after tune 469rwhp and 450tq I need to get to work on Monday the USB cable for the camera is at work, I'll post that chart too. the guys said give it a few months to break in the engine and I'll see closer to 480 numbers. The SLP cai in not in the dyno because their jet fans were not working, they need to service them...

  19. #199
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    also here's the mods in my sig and some of the first 2 pulls dyno, short pulls...
    Last edited by djvaly; 03-11-2007 at 10:26 AM.

  20. #200
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863

    Thumbs up

    the signature is showing now but not above.
    Last edited by djvaly; 03-13-2007 at 06:57 AM.

Page 10 of 19 FirstFirst ... 67891011121314 ... LastLast

LinkBacks (?)

  1. 05-21-2013, 09:30 AM
  2. 11-11-2011, 01:22 PM
  3. 10-19-2011, 02:38 PM
  4. 09-06-2011, 08:45 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dyno numbers! Post 'em up!
    By FinZ28 in forum Almost Anything Goes
    Replies: 9
    Last Post: 05-09-2012, 11:10 AM
  2. First dyno numbers...
    By maxpit in forum Western Members
    Replies: 101
    Last Post: 10-29-2008, 09:14 AM
  3. Tr230 dyno numbers 98 heads=bad numbers?
    By phoenix1987 in forum Dyno Information
    Replies: 7
    Last Post: 09-11-2007, 09:33 AM
  4. New Dyno Numbers
    By JD_Z28 in forum Western Members
    Replies: 65
    Last Post: 04-04-2007, 09:04 PM
  5. DYNO numbers
    By Brad5150 in forum Firebird / WS6
    Replies: 2
    Last Post: 01-20-2007, 08:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •