Results 1 to 3 of 3

Ride height question QA1r's and V6 springs

This is a discussion on Ride height question QA1r's and V6 springs within the Drag Racing forums, part of the Racing Forums category; I'm curious what you guys cars ride height is. I have BMR lowering springs on the rear with my QA1r's ...

  1. #1

    Ride height question QA1r's and V6 springs

    I'm curious what you guys cars ride height is. I have BMR lowering springs on the rear with my QA1r's up front lowered. It was slammed pretty good front and back. We l just got thru removing the rear BMR springs that were to stiff for the track and replaced them with some V6 springs and comp engineering shocks set at 50/50. Wow now I'm riding high unless Im in shock because what I was use to. My measurements are
    28.5 rear drivers
    28 rear pass
    27 front drivers
    26.5 front pass
    I just raised my front up half inch to balance it out some. Does this sound right for a V6 springs in the rear and QA1's up front.

  2. #2
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Every car is different depending on tire size and load. Just cut a 1/4 coil out of the V-6 springs at a time until you get it to the lowered height you want. We usually cut around 3/4-1 coil for car that has 1.5"-2" drop in the front. Remember to fill the tank up and we usually even take some eight and put it in the drivers seat to mock up the real weight.
    Don't be afraid of the bottle!!! Be afraid of your tune!!!

  3. #3
    I think its just me right now. I'm use to the BMR's. I put these in for the drag strip only. I might just put my WS6 springs back in also and see how they compare at the track after I run this weekend with these V6 springs. I know the BMR's cant be helping me at the track with my rotten 2.1 60 ft.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What is normal ride height???
    By Whamhammer in forum Suspension and Handling
    Replies: 2
    Last Post: 05-21-2016, 03:25 PM
  2. Ride height question
    By Dr.Crash in forum Suspension and Handling
    Replies: 3
    Last Post: 06-29-2008, 01:18 AM
  3. ride height?
    By Dr.Crash in forum Suspension and Handling
    Replies: 8
    Last Post: 09-11-2007, 12:02 PM
  4. Stock ride height?
    By UKXK189 in forum Suspension and Handling
    Replies: 1
    Last Post: 07-26-2007, 02:14 PM
  5. Pinion angle for an adjustible TA on a stock height ride?
    By NeeD4SpeeD in forum Suspension and Handling
    Replies: 4
    Last Post: 01-31-2006, 02:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •