Results 1 to 8 of 8
Thread: Ran my stock 07 mustang GT
-
11-16-2010, 12:05 PM #1
Ran my stock 07 mustang GT
Decided to run my recently purchased 5 speed Manual 07 mustang GT with shitty 3.31 gears.
Result was:
13.4@102mph with 2.0 60' and a few 13.5@104s
She definitely has 13.3s in her stock, but I have already ordered intake and catback, so I wont be finding that out anytime soon.
-
11-16-2010, 12:27 PM #2
Not too shabby for a 4.6L.
-
11-16-2010, 05:01 PM #3
Not bad at all for a stock 4.6. I'd say you have some practice under your belt to come off with those times on a set of 3.31's. You need to swap up to 4.10's. I went from 3.55's to 4.10's and took almost a full .2 seconds off my time, but I never ran an NA GT any better then a 13.5 even with the 3.55's let alone airplane gears.
How does it compare to your Formula?1999 WS6 - Black - 414rwhp 401rwtq w/o NOS
632rwhp 577rwtq with HSW 250shot NOS
-
11-29-2010, 12:46 PM #4
- Join Date
- May 2009
- Location
- Pa
- Posts
- 38
Black- 2005 STi 320whp/352wtq
What happened on the 104mph traps? Miss shifts? Sounds like you had a good launch for what I'm assuming were street tires.
-
11-29-2010, 12:48 PM #5
I ran my car stock with street tires when I first got her and it ran a 13.5X at 104MPH.
Since he ran faster with lower MPH, on those 13.5 times he probably spun a little more out of the gate.
-
12-05-2010, 02:31 AM #6
Sorry I totally forgot about this thread lol.
Thanks. Yeah I have ran 13.4 with my 06 GT before, 12.70 with a stock 03 cobra letting the gas go twice due to wheelhop. then 11.3 with nothing but a pulley swap, 12.98 in a 99 M6 trans am, and now 13.4 with her.
I just bought 4.10s, slp loudmouths, pypes O/R H, C&L Street intake, Xcal2 tuner and will add deleteplates as well. It should get me to 310rwhp and about 325 or so rwtq and that should bring me to what? 12.5s? I hope so.
I have been getting lucky on running good times at tracks
Nope, ONLY difference was, on 104mph trap runs, I had hooked just the way i did on the 102mph traps, but on 104mph traps the engine was completely cooled off (about 1 hr or wait in between runs). on 102mph run, i drove to track 120miles and straight to staging lines. I hooked well and SURPRISINGLY ran a 13.4 but trapped a little low due to a very hot engine. I wish I arrived a bit early and cooled her off. I think it would have been 13.3s. Oh well, time to find out what she has to offer with mild bolts on
Thanks guys!!!
-
12-08-2010, 08:14 PM #7
3 valve with 5 speed on 4.10's = no top speed at all! I would stick with a mid range gear such as 3.55's. I think your tranny gears are shorter then a 6 speed also. Great Time btw! Most 3 valve owners aren't even touching the times you are stock for stock.
-
12-09-2010, 12:05 PM #8
Those are some good times my friend.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stock headers, stock (GM) cats, y pipe custom fitted for LM1
By az gt eater in forum Parts For Sale / TradeReplies: 2Last Post: 11-20-2011, 08:26 AM -
stock rwhp? and i need a opinion on a mustang
By via sin dios in forum Firebird / WS6Replies: 28Last Post: 10-08-2007, 01:17 PM -
blown mustang vs. stock Z28
By toneloc60 in forum Kill StoriesReplies: 14Last Post: 10-31-2005, 03:14 PM
Bookmarks