Results 1 to 5 of 5
Thread: quarter mile
-
08-14-2006, 11:19 AM #1
- Join Date
- Jul 2006
- Location
- tinley park, Illinois
- Age
- 42
- Posts
- 5
black- 2000 camaro Z28
quarter mile
I have a 2000 Z28 with hooker headers, 3.42 rear end, airbox, flowmaster exhaust, ported throttlebody, crane cam power tuner. What should I expect to run quarter mile time? From here what is the best way to get to mid 11's?
-
08-14-2006, 12:02 PM #2
with 3.42 gears, i'm assuming M6 trans, so about 12.8ish.
best way to get to 11s, well that's up to you what's best. for me it is nitrous. all stock car i went 11.97.Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
-
08-15-2006, 11:43 AM #3
- Join Date
- Dec 2005
- Location
- Ms
- Posts
- 57
If its a M6, put a moser 9" in the car, and suspension work. From experience having heads and cam with no supsension work and a stock rear end with 4:10's, is useless. Spinning ain't winning!
-
08-18-2006, 09:49 PM #4
- Join Date
- Aug 2005
- Location
- Los Angeles
- Age
- 51
- Posts
- 182
Black- 2001 Trans Am WS6
Yeah nitrous is the cheapest. You could also get a cam (Like the Magic Stick or TRex). That and the supporting mods (valve springs, retainers, etc...), would get you really deep in the 12's. I think if you did that and a little weight reduction you'd have an 11 sec. strip. Unless of course you know how to power shift well, then you won't need anything other then the cam and a tune.
-
08-19-2006, 11:27 AM #5
All good suggestions here. The moral of the story is that there are several ways to go faster. How fast you go and which method you use depends on how much you want to spend. The cheapest is Nitrous $600+, Heads/Cam $3,600+, Blower/Cam $9,200+, Dyno Tune $450, Roll Bar/Cage $1,400, 'Built' motor $10,000-$26,000 (but the sky's the limit). These are just some rough estimates to get you thinking in the right ballparks, but can vary greatly depending on what else you do at the time and exactly what parts you opt to go with. For example you can spend $1,500 or $4,000 on heads. I have a $550 nitrous kit that I have around $1,000 tied up in so far and haven't even installed it yet.
If you want to go fast be prepared to dig deep or get sponsors with deep pockets. The days of getting a Keith Black 1000 horse Hemi for $5,000 are long gone.Michael
In GA waving from '02 C5 LS1, Z51, D1SC, 60lb injectors,RPM level 5-4L60E, 3:42, Yank 3600, QA1-12 ways, MTI long headers, high flow cats, Borlas, Wilwood, 603rwhp, 542rwtq.(DynoJet 248-C) 10.89@127.57 on street tires, Race Weight 3,640 lbs
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Quarter Mile time?
By 90ARAPAJ in forum Firebird / WS6Replies: 4Last Post: 10-06-2011, 05:23 PM -
quarter mile times?
By 1999sscamaro in forum Camaro / SSReplies: 35Last Post: 07-15-2010, 07:11 PM -
quarter mile results...
By guitarjay76 in forum Camaro / SSReplies: 3Last Post: 04-27-2009, 09:03 AM -
quarter mile first
By slpcamaro in forum Almost Anything GoesReplies: 17Last Post: 04-09-2008, 10:42 AM -
quarter mile prediction
By william SS in forum Drag RacingReplies: 8Last Post: 10-19-2007, 10:59 PM
Bookmarks