Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    No 12's (yet) But New PB

    Went to the track today and had a good time.

    They had a few timing problems, no 1/8th on one slip no MPH on another.

    The car ran real well but I couldn't get a decent 60 ft time even with the DR's.

    It was also the first time its been WOT since the LT install and tune.

    First Run 11:06am RL
    60ft 2.009 1/8 N/A 13.209 at 106.33mph

    Second Run 11:15 LL
    60 ft 2.058 1/8 8.544 at 85.21mph 1/4 13.183 at 106.35mph

    Third Run 11:29 LL
    60ft 2.055 1/8 8.546 at 85.23mph 1/4 13.175 at 106.96mph

    Fourth Run 11:37 RL
    60ft 2.015 1/8 8.537 at 85.51 mph 1/4 13.161 at 106.33

    Fifth Run 11:43 LL (Best Run)
    60 ft 2.066 1/8 8.534 at 85.57 1/4 13.141 at 107.83

    Sixth Run 12.21pm RL
    60ft 2.013 1/8 8.579 at 84.96 1/4 13.231 MPH N/A

    Too many FWD cars driving right through the water box :x

    A lot of peoples 60ft were off as they were spinning.

  2. #2
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    I forgot to show my sig.
    2010 Camaro SIM 2SS/RS A6
    1999 TA A4 NBM
    12.265 at 110.52mph

  3. #3
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    59
    Posts
    4,542

    Arctic White
    2000 Z28

    Drop your 60" and you have a 12. Just get some DR's or ET Streets and you should be good.

  4. #4
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by Z28Thunder View Post
    Drop your 60" and you have a 12. Just get some DR's or ET Streets and you should be good.
    I was on DR's by the 4th pass I had them at 18psi.

    The track was prepped badly and the FWD boys were rolling through the water box to the line dragging water everywhere.

  5. #5
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    59
    Posts
    4,542

    Arctic White
    2000 Z28

    Quote Originally Posted by transamtom View Post
    I was on DR's by the 4th pass I had them at 18psi.

    The track was prepped badly and the FWD boys were rolling through the water box to the line dragging water everywhere.
    Well a converter would get you there as well. But if your trying for 12's as the car is running I would go to ET Streets. I do see the water all over the place comment. A low 1.9x or a 1.89 would get you a 12 IMO.. Gratz on the new PB!!!!

  6. #6
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by Z28Thunder View Post
    Well a converter would get you there as well. But if your trying for 12's as the car is running I would go to ET Streets. I do see the water all over the place comment. A low 1.9x or a 1.89 would get you a 12 IMO.. Gratz on the new PB!!!!
    Thanks,I was hoping fr a 1.8x 60ft today as my best with this car on street tires was 2.001.

  7. #7
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by Ryder View Post
    What are you talking about???
    I didn't understand anything so please explain it in details so I'll come to know about it easily...!!!
    Thanks in advance..
    Drag Racing on a sanctioned track.

    60 foot time is a measurement of how good a car launches off the start line.

    DR's are Drag Radials

    ET Streets are Mickey Thompson slicks.

    My 1/4 mile time is 13.14,I would like to go 12.xx.

    Google "Drag Racing" for more info.

  8. #8
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    What DR's are you running? I assume you are trying to foot brake it? What RPM before you are rolling the tires?

  9. #9
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by 35th-ANV-SS View Post
    What DR's are you running? I assume you are trying to foot brake it? What RPM before you are rolling the tires?
    Hoosiers 255/50/16.

    I tried launching off idle,brought it up to 1000 RPM,tried 1200RPM.

    I think the 1200 RPM launch was pretty good it netted me my 2.066 60ft 13.141 at 107.83 slip.

    That 60 wasn't my best I got a 2.01 on another run.

    Next time I will do a medium burnout have the tires at 17-18psi and leave at what ever the brakes will hold.

    A friend of mine has the same tires and 3600 stall and gets 1.65 60fts.

    I would be happy with a 1.89-1.95 with the stock converter.

  10. #10
    Member jrzdude's Avatar
    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    122
    2002 Black WS6

    I have pretty much the same mods as you, and I can't for the life of me get in the 12's. Best time was 13.00 @ 108 (FML) My Nitto 555's hook pretty good so I'm thinking the next step is definitely going to be a stall, probably a 3600. Seems to be the easiest way to get into 12's with just having Full intake and exhaust.

  11. #11
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    The best time I was able to cut on Nitto 555r DR's was 1.906 launching at 3K. I'm a M6.

    You should definitely be able to cut one below me with those Hoosiers.

    On stock rubber I netted a 2.06.

  12. #12
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Quote Originally Posted by jrzdude View Post
    I'm thinking the next step is definitely going to be a stall, probably a 3600. Seems to be the easiest way to get into 12's with just having Full intake and exhaust.
    That would do it for sure.

    My 02 SS vert had only headers and an off road Y-pipe, (stock CME catback) and I stuck a little 3400 stall in there.

    I went 12.76 at 107.xx and did that on the stock rubber. Cut a 1.90 60 foot with it driving it easy. A 1.70 60 foot would have been cake walk with sticky tires, probably drop into the 12.40's or 50's easily.

  13. #13
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by 35th-ANV-SS View Post
    The best time I was able to cut on Nitto 555r DR's was 1.906 launching at 3K. I'm a M6.

    You should definitely be able to cut one below me with those Hoosiers.

    On stock rubber I netted a 2.06.
    The funny thing is I got a 2.01 on my 275/40/17 Yoko's last fall and my 60's are the same now.

    I did all the free mods last week(FRA,PP TB,EGR mod,TBBP) so I am hoping its enough to get it there.

    I still need a nice day to do my RLCA's and PHB.

    I guess I have all summer

  14. #14
    O U 8 1 2 Spaz's Avatar
    Join Date
    Nov 1999
    Location
    over here...
    Age
    45
    Posts
    25,709

    []D [] []V[] []D
    1999 trans am

    the times are nice and consistant...

  15. #15
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    Quote Originally Posted by jrzdude View Post
    I have pretty much the same mods as you, and I can't for the life of me get in the 12's. Best time was 13.00 @ 108 (FML) My Nitto 555's hook pretty good so I'm thinking the next step is definitely going to be a stall, probably a 3600. Seems to be the easiest way to get into 12's with just having Full intake and exhaust.
    I'm in the same boat...13.109 @108MPH.

    That trap MPH is screaming mid-12's

  16. #16
    Senior Member TLS_Addict's Avatar
    Join Date
    Mar 2008
    Location
    PA
    Posts
    1,719

    Ray Charles blue
    1492

    Wow, how come you can only launch at 1100-1200 rpms? If I remember I was launching my A4 at about 1600-1700 or a little higher.

    I was with 2.73s at the time though, not sure what your gears are.

  17. #17
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by TLS_Addict View Post
    Wow, how come you can only launch at 1100-1200 rpms? If I remember I was launching my A4 at about 1600-1700 or a little higher.

    I was with 2.73s at the time though, not sure what your gears are.
    My tires want to break loose when I load her up too much.

  18. #18
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by Spaz View Post
    the times are nice and consistant...
    Yeah bring on the brackets

    My 94 TA was much the same(only slower).

  19. #19
    Waiting on the Tree transamtom's Avatar
    Join Date
    Jul 2005
    Location
    Niagara Falls Ont.Canada
    Posts
    927

    NBM
    1999 TA A4

    Quote Originally Posted by jrzdude View Post
    I have pretty much the same mods as you, and I can't for the life of me get in the 12's. Best time was 13.00 @ 108 (FML) My Nitto 555's hook pretty good so I'm thinking the next step is definitely going to be a stall, probably a 3600. Seems to be the easiest way to get into 12's with just having Full intake and exhaust.
    What kind of 60 fts are you getting?

    With a 13 flat it could be as simple as running front skinnies or airing the fronts to 40psi to reduce rolling resistance.

    I am going back this weekend.

    Cross your fingers
    Last edited by transamtom; 05-05-2011 at 04:20 PM.

  20. #20
    Member jrzdude's Avatar
    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    122
    2002 Black WS6

    My 60's average around 2.0. Can't get much better than that without DR's or a stall, OR both, hehe =)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •