Page 1 of 5 12345 LastLast
Results 1 to 20 of 93

et guess/estimates please

This is a discussion on et guess/estimates please within the Drag Racing forums, part of the Racing Forums category; Well it's that time to head to the local track tomorrow. I would appreciate any guesses for my et. Mods ...

  1. #1
    Senior Member Z28boy2000's Avatar
    Join Date
    Jun 2008
    Location
    Rochester, NY Rochesterracing.com
    Posts
    1,276
    2000 Camaro B4C

    et guess/estimates please

    Well it's that time to head to the local track tomorrow. I would appreciate any guesses for my et.

    Mods as follows
    -tsp torquer 2
    -fast 92/92
    -98mm FTP lid
    -built tranny (a4)
    -4k stall
    -umi tunnel mount t/a
    -umi 3pt sfc's
    -umi chromemoly lca's and panhard with rod ends
    -LCA Relo brackets
    -pacesetters headers
    -cut out
    -nitto nt05r's out back
    -3.73's - stock 10 bolt
    -comp engineering drag shocks



    ** first pass with the car since all mods **
    Last edited by Z28boy2000; 10-07-2011 at 04:45 AM.

  2. #2
    Senior Member FasstChevys's Avatar
    Join Date
    Oct 2005
    Location
    Minnesota
    Posts
    3,315

    White
    '10 ZR1

    13.0 flat!

  3. #3
    Moderator Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,552
    No mention of any rear gear or sticky tire?

  4. #4
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    Mid to high 12's... the nt05 is a drag radial, dont know how well they hook though.

  5. #5
    Senior Member Z28boy2000's Avatar
    Join Date
    Jun 2008
    Location
    Rochester, NY Rochesterracing.com
    Posts
    1,276
    2000 Camaro B4C

    Nitto NT05'r out back and 3.73's

  6. #6
    Senior Member FasstChevys's Avatar
    Join Date
    Oct 2005
    Location
    Minnesota
    Posts
    3,315

    White
    '10 ZR1

    Quote Originally Posted by Z28boy2000 View Post
    Nitto NT05'r out back and 3.73's
    okay, I revise my prediction to 12.85

  7. #7
    Senior Member TLS_Addict's Avatar
    Join Date
    Mar 2008
    Location
    PA
    Posts
    1,706

    Ray Charles blue
    1492

    Quote Originally Posted by cpop98ws6 View Post
    Mid to high 12's... the nt05 is a drag radial, dont know how well they hook though.
    I know which ones dont even with a stock converter! hahaha I was doing some reading and I have seen where most guys say you shouldnt do a huge burn out with them. I had 555s on my 04 GTO and I just would spin to clean them off and cut a 1.905 with a 6-speed stock suspension.

    Quote Originally Posted by Z28boy2000 View Post
    Nitto NT05'r out back and 3.73's
    Ok, we have the same car but you have REAL mods. My mods dont do shit for power and my car is hitting 13.0XX at just under 107 so I think if you hool half way you will be in the mid 12s if the DA isnt killing you. Remember, converters do eat some MPH on the top end.

    Quote Originally Posted by FasstChevys View Post
    okay, I revise my prediction to 12.85
    You are probably right, I am thinking best case.

  8. #8
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,465

    Red
    02 35th LE Camaro SS

    12.67

  9. #9
    Former Mopar Man 2002ssslp's Avatar
    Join Date
    Jun 2011
    Location
    Branchville, NJ
    Posts
    3,111

    Silver & Blue
    02 Camaro SS, 04 GTO

    12.77 if the rear holds up.

  10. #10
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    52
    Posts
    4,542

    Arctic White
    2000 Z28

    You have a 11 second car with the mods you have mentioned. But you have two issues. The nitto's will not handle the power you have. You will need ET Streets or a slick to get your best times. That is the first issue. I would start saving for a 12 bolt or 9" now if you have not already. The stock 10 bolt will not last long behind the power you could put out. Even running just nitto's you are taking a big chance. My guess on time mid to low 12's.

  11. #11
    Senior Member FasstChevys's Avatar
    Join Date
    Oct 2005
    Location
    Minnesota
    Posts
    3,315

    White
    '10 ZR1

    Quote Originally Posted by Z28Thunder View Post
    You have a 11 second car with the mods you have mentioned. But you have two issues. The nitto's will not handle the power you have. You will need ET Streets or a slick to get your best times. That is the first issue. I would start saving for a 12 bolt or 9" now if you have not already. The stock 10 bolt will not last long behind the power you could put out. Even running just nitto's you are taking a big chance. My guess on time mid to low 12's.
    Man - we'll have to agree to disagree. I'm not seeing anywhere near 11's with what I'm hearing. Time will tell. He needs north of 400 to the wheel to even get CLOSE to 11's.

    Good luck OP! Let us know the results!

  12. #12
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    52
    Posts
    4,542

    Arctic White
    2000 Z28

    Quote Originally Posted by FasstChevys View Post
    Man - we'll have to agree to disagree. I'm not seeing anywhere near 11's with what I'm hearing. Time will tell. He needs north of 400 to the wheel to even get CLOSE to 11's.

    Good luck OP! Let us know the results!
    I agree that is only a 12 second car as is, But for me most of that is based on the tire he is using. I am thinking he has headers not mentioned in the mod list. I see the cut out mentioned with headers ??

    So with that he is close to my setup. 231/237 TSP,LS6 intake,Pacesetter Headers,true duals dumped at the axel,4000 TCI,3.73's. I was into the high 11's with ET Streets. I got in the Mid 11's with Hoosier Race Slicks. And it was done on a 10 bolt before it went.
    Last edited by Z28Thunder; 10-06-2011 at 07:46 PM.

  13. #13
    Senior Member FasstChevys's Avatar
    Join Date
    Oct 2005
    Location
    Minnesota
    Posts
    3,315

    White
    '10 ZR1

    Quote Originally Posted by Z28Thunder View Post
    I agree that is only a 12 second car as is, But for me most of that is based on the tire he is using. I am thinking he has headers not mentioned in the mod list. I see the cut out mentioned with headers ??

    So with that he is close to my setup. 231/237 TSP,LS6 intake,Pacesetter Headers,true duals dumped at the axel,4000 TCI,3.73's. I was into the high 11's with ET Streets. I got in the Mid 11's with Hoosier Race Slicks. And it was done on a 10 bolt before it went.
    And now I'm on your side

    I didn't make the observation of having a cut out probably means he has headers. Since he didn't have headers (in my mind), it also meant to me that he probably didn't have a cam upgrade(even though it's right there in front of me)........so, I'm going to revise again. 12.38

    Thanks ZThunder!


    '89 Turbo Trans Am Pace Car (Mom's car now)

    '68 Camaro - 572 coming soon

    '67 Nova - 406 SBC, PG

    '10 ZR1

  14. #14
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    52
    Posts
    4,542

    Arctic White
    2000 Z28

    Quote Originally Posted by FasstChevys View Post
    And now I'm on your side

    I didn't make the observation of having a cut out probably means he has headers. Since he didn't have headers (in my mind), it also meant to me that he probably didn't have a cam upgrade(even though it's right there in front of me)........so, I'm going to revise again. 12.38

    Thanks ZThunder!
    And it all depends on what that cut out is after... The nitto's will not net the best ET period. To me it is all in the 60' and he has all the right things for a good 60' minus the tires. Well that and a stock 10 bolt..

  15. #15
    Senior Member Z28boy2000's Avatar
    Join Date
    Jun 2008
    Location
    Rochester, NY Rochesterracing.com
    Posts
    1,276
    2000 Camaro B4C

    As far as hp goes when I did the cam swap I had it dyno'd after the tune. I had a stock ls1 intake and tb and made 371. With the new fast and a new tune my tuner says I should be damn close to 400...just havent had time on a dyno yet.



    And to edit my original post **I have pacesetter headers and a cutout**

  16. #16
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,520

    98 Formula
    06 duramax

    decent 60' will put you in the 11's IMO......I'm gonna say 11.80's. That car definitely has 11's in it with traction. More stall, more cam, and more intake/tb than I got and my car went 11.80's on high 1.60's 60'.

  17. #17
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    52
    Posts
    4,542

    Arctic White
    2000 Z28

    Quote Originally Posted by Z28boy2000 View Post
    As far as hp goes when I did the cam swap I had it dyno'd after the tune. I had a stock ls1 intake and tb and made 371. With the new fast and a new tune my tuner says I should be damn close to 400...just havent had time on a dyno yet.



    And to edit my original post **I have pacesetter headers and a cutout**
    I know most wont agree but I bet you could have ran a low 12.01 or .00 with the stock intake. With an outside chance of maybe a 11.99. But that would be with a ET Street or Race slick.. I base that off what I ran myself.

  18. #18
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    52
    Posts
    4,542

    Arctic White
    2000 Z28

    Quote Originally Posted by 0rion View Post
    decent 60' will put you in the 11's IMO......I'm gonna say 11.80's. That car definitely has 11's in it with traction. More stall, more cam, and more intake/tb than I got and my car went 11.80's on high 1.60's 60'.
    Minus the tires he has the setup for it. Ran 11.52 on a 1.58 60' myself..

  19. #19
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,465

    Red
    02 35th LE Camaro SS

    Well to be fair here...he asked what his "current set-up" will run. Tires, bigger stall, bigger cam, etc is just all speculation because he doesn't have any of that.

    I also don't see relocation brackets for the LCA's as a mod.

    He is going to have major traction issues and a weak 60' time.

    My time above stands I might be on the high side a little though.

  20. #20
    Senior Member Z28Thunder's Avatar
    Join Date
    Dec 2006
    Location
    Broken Arrow, Ok
    Age
    52
    Posts
    4,542

    Arctic White
    2000 Z28

    Quote Originally Posted by 35th-ANV-SS View Post
    Well to be fair here...he asked what his "current set-up" will run. Tires, bigger stall, bigger cam, etc is just all speculation because he doesn't have any of that.

    I also don't see relocation brackets for the LCA's as a mod.

    He is going to have major traction issues and a weak 60' time.

    My time above stands I might be on the high side a little though.
    Okay so I am slow. I thought he had all of what he listed in his mod list.

Page 1 of 5 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dyno Estimates
    By Z28boy2000 in forum External Engine
    Replies: 9
    Last Post: 05-17-2010, 10:04 PM
  2. hp/tq estimates?
    By R_Yates69@Hotmail.com in forum Firebird / WS6
    Replies: 5
    Last Post: 04-18-2010, 07:20 AM
  3. Estimates
    By jrocs00z28 in forum Corvette
    Replies: 2
    Last Post: 12-23-2007, 09:39 PM
  4. 1/4 mile estimates
    By fox87stang in forum Drag Racing
    Replies: 16
    Last Post: 10-08-2007, 07:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •