can i run a 12.4

[BLKbandit98]

Ok so my new mods are comming this month. When im said with and done ill have... loudmouth, KOOKS headers, new manifold, lid, TB (80mm) and some work on HPtuners. I might just throw some 4.11's in as well. So heres my question on a track whos elevation is areound 60ft, with warm sticky tires can i run a 12.4?? My firend took a bet with me and i really want his $50. Do i have a chance or should i call it off. Im a decent dirver

[Capster78]

Ok so my new mods are comming this month. When im said with and done ill have... loudmouth, KOOKS headers, new manifold, lid, TB (80mm) and some work on HPtuners. I might just throw some 4.11's in as well. So heres my question on a track whos elevation is areound 60ft, with warm sticky tires can i run a 12.4?? My firend took a bet with me and i really want his $50. Do i have a chance or should i call it off. Im a decent dirver

Have any suspension? I can see maybe a 12.8-12.6 if you can nail the launch. for that 12.6 your going to have to be in the low1.6's on your 60ft. Not impossable on stock suspension but if your an M6 car or an auto without a stall its going to take John Force driving abilities.

[BLKbandit98]

wut if i throw in subframes???

[Zboner]

Ok so my new mods are comming this month. When im said with and done ill have... loudmouth, KOOKS headers, new manifold, lid, TB (80mm) and some work on HPtuners. I might just throw some 4.11's in as well. So heres my question on a track whos elevation is areound 60ft, with warm sticky tires can i run a 12.4?? My firend took a bet with me and i really want his $50. Do i have a chance or should i call it off. Im a decent dirver

ha call it off man

[BIG D's SS]

Not gonna happen man. I hope you have a spare $50 to dish out.

[Zboner]

not going to happen in a million years man, sorry

[newguy WS6]

My suggestion is to get some Slicks or ET Streets.. If not you can forget it.. Even with the slicks some killer drivin it would be close..

Id also work on the suspension

[juiced99ws6]

wut if i throw in subframes???

those were be mandatory for what you are trying to accomplish.. however if you wanna do it with ONLY those power mods you would also need a lightweight K member and front a arms with some double adjustable front shocks for wiehg ttransfer and then your LCA's and panhard bar and replace your sway bar bushing with poly and hella sticky tires.. even with the above parts I would really just have to say good luck and ill drop ya prayer

[BLKbandit98]

is there anyway to get there w/o a cam and nitrous???

[ttocs]

is there anyway to get there w/o a cam and nitrous???

All bolt ons + some suspention mods as listed above combined with some drag tires. If your in a rush then get a cam or nitrous. 150 shot is safe in a stock ls1 block. With your mods and 150 you should get your 12.4

[juiced99ws6]

with 150? lol are you shitting me.. im there right now and hitting 2.2 60ft times with 100 shot..if his track is even half decent 150 would put him in the 11's easy

[ttocs]

with 150? lol are you shitting me.. im there right now and hitting 2.2 60ft times with 100 shot..if his track is even half decent 150 would put him in the 11's easy

As long as hes using good rubbers. Nitrous doesnt help if your going to just spin the tires. If hes never dragged before then that is going to hold him up a lot too, espeically if hes never dragged before and is using nitrous for his first time. But yeah, if you have the normal bolt ons, pretty good tires and a 150 shot you better be running 11s, even if your skills arent top notch.

[nabdrill]

So what's the user friendliest n20 kit??

[ttocs]

So what's the user friendliest n20 kit??

Direct Port. But if your only running a 150 a wet with a plate will be fine. Just make sure you have all your safety stuff.

[shady1504]

12.4 sounds easy, shit I'm at 4500ft and my cousin ran his 02 ws6 m6 to a 13.0 stock on drag radials so I don't see why not.

[BLKbandit98]

12.4 sounds easy, shit I'm at 4500ft and my cousin ran his 02 ws6 m6 to a 13.0 stock on drag radials so I don't why not.

WHAT!!!! no way. So y is it so hard for me to run a 12.4 or 12.5

[Mach1Mustang]

WHAT!!!! no way. So y is it so hard for me to run a 12.4 or 12.5

who knows?
do u have any track times as of yet. i am hoping to net a 12.4-12.6 this weekend as well. Hell, suprize us all!
Doubt it though.

[Bigrus]

no

[BLKbandit98]

Thanks fellas, maybe i was being unreal about that time. But can i get anywhere from a 12.5-12.7??

[rotwiler]

I think there needs to be more info..is it a auto...m6 ? etc .. With just a stall converter and long tube headers, basic exhaust and fipk, nothing special I ran a 12.6 and I didn't do any weight reduction... I even weigh around 300 lbs, so with a lighter driver 12.4's-5's would be easy..
complete mods are: 3400 2.1 str fuddle stall, FLP LT headers with high flow cats, magnaflow catback, k&N FIPK, STB, SFC's boxed diamond, LCA's boxed, 3:42 gears(in stock 10 bolt), Bilstein shocks and handheld Predator tuner(custom tune by rwtd). Running 16x8 wheels with nitto drag radials. I have seen others run 12.7's with just long tube headers and a lid before.