Results 1 to 2 of 2

12.5 @ 110.7 mph - LSx 69 Camaro

This is a discussion on 12.5 @ 110.7 mph - LSx 69 Camaro within the Drag Racing forums, part of the Racing Forums category; Took my 69 Camaro with the LS1 and 4L60E to the Orlando Speedworld yesterday. Specs: 1969 Camaro 2000 LS1 SLP ...

  1. #1
    Junior Member 69MyWay's Avatar
    Join Date
    Dec 2006
    Central Florida

    69 Camaro 69&85 Vettes

    12.5 @ 110.7 mph - LSx 69 Camaro

    Took my 69 Camaro with the LS1 and 4L60E to the Orlando Speedworld yesterday.


    1969 Camaro
    2000 LS1
    SLP stage III heads/cam
    LS6 intake
    36# injectors
    Long tube headers X pipe and Imco muffs
    Tuning by Jessie Bubb
    TCI 2900 stall
    Transgo shift kit
    Ford 9" with 3.5 gears and 31 spline mosier axles
    VB&P fiberglass rear springs
    7/8" rear sway bar
    Edelbrock Shocks
    Goodyear EMT 285 40 18 rears with 20 psi
    3/4 tank of 91 octane gas (oversized caprice plastic tank...about 20 gal on board)

    The track was very sticky, but I didn't do a burn out. I launched by rolling off the line (left the trans in D3) and rolled into it.

    60' 2.070
    330 5.401
    1/8 8.121
    MPH 89.96
    1000 10.505
    1/4 12.539
    MPH 110.74

    I was happy to see 12.5, but thought my MPH should have been a bit higher. I know I could have done better on the launch as a 1.8 is not unheard of even on the Goodyear EMT (tires are fresh).

    The car felt great all the way through, but I might have squeezed a bit more out by manually shifting.

    Anyway...just happy to be in the 12s. On the way home I rolled up the windows, cranked the a/c on full blast, turned the stereo up, and set the cruise. It was 80 degrees in Orlando yesterday. Nice to have a hot rod that doesn't act like a hot rod when you are just cruising down the highway.

  2. #2
    Member Empatho's Avatar
    Join Date
    Jan 2007
    San Diego

    02 Z28

    good numbers bada$$ car
    2002 Z28 Auto (3.23 gears)
    Lid, UD pulley, Shift Kit, 160 Thermo, Y-pipe, Panhard, TB bypass, Bellow, K&N, Strut Brace, Flowmaster, weight reduction.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts