Z07 pics

**Selride** · 06-07-2008, 06:53 PM

These have got to be the best kept secret in the f-body wheel click. Bolt right on the car, no problems at all. They come 11 in the rear but went with 9.5 on all four, no spacers, no cuts no rub..

**Mr. Luos** · 06-07-2008, 08:35 PM

Originally Posted by Selride

These have got to be the best kept secret in the f-body wheel click.

To each their own....

**stangslayer98** · 06-07-2008, 09:15 PM

would look even better lowered

**Benner** · 06-07-2008, 09:27 PM

those look awesome. Links to where they can be had??

**squee** · 06-07-2008, 10:00 PM

Corvette Garage.

I FINALLY decided thats what I want...18x9.5 up front and 19x11 out back. What kind of problems should I expect as far as clearance?

**Selride** · 06-08-2008, 05:15 AM

Originally Posted by Mr. Luos

To each their own....

lol, thanks for raining on my parade

The 11 wide should fit with some beating of the inner fender and shaving of the bump stop. This is all on a stock height car though.

**dissonance** · 06-08-2008, 06:46 AM

Originally Posted by stangslayer98

would look even better lowered

+1 but i dont know how low you can go w/o problems

**Mr. Luos** · 06-08-2008, 07:59 AM

Originally Posted by Selride

lol, thanks for raining on my parade

Sorry...shouldn't have posted that. Was a little buzzed last night.

Although, while they look good, they aren't a secret. Several as good or better wheel selections out there.
But, my opinion shouldn't matter...you like them, and that is all that matters.

**blue02Z** · 06-08-2008, 11:10 AM

dang Mr. Luos! asshole!!

o.p.- how much they cost you?

**Selride** · 06-08-2008, 11:21 AM

$860 at my door. Can't really beat that.

**KyleLs1** · 06-08-2008, 11:30 AM

they look nice. but +1 on lowering it

**squee** · 06-08-2008, 12:29 PM

Originally Posted by Selride

$860 at my door. Can't really beat that.

What size are they? 18x9.5 all around?

**Eugenio_SS** · 06-08-2008, 05:30 PM

they don't actually come in 11", but in 10.5"

I have the C6 version of the wheels, but went w/ 18x10.5 on all corners for the street... love them.
Your car looks great... only need to lower it a tad

I kept on debating between c6 vs c6z06...

**squee** · 06-08-2008, 05:51 PM

Originally Posted by Eugenio_SS

they don't actually come in 11", but in 10.5"

I have the C6 version of the wheels, but went w/ 18x10.5 on all corners for the street... love them.
Your car looks great... only need to lower it a tad

I kept on debating between c6 vs c6z06...

I'm a little confused now. They advertise them as a 11, but there 10.5, correct? What about the 18x9.5 fronts and 19x12s in the garage sale section? There not even listed that I can see...

**Eugenio_SS** · 06-08-2008, 05:55 PM

the rear c6z06 19" wheel is 19x12... I'm pretty sure about it.
As for the 18x11, they are 18x10.5
The measurement must be made inside the lip, where the tire will bed.

**squee** · 06-08-2008, 05:59 PM

Originally Posted by Eugenio_SS

the rear c6z06 19" wheel is 19x12... I'm pretty sure about it.
As for the 18x11, they are 18x10.5
The measurement must be made inside the lip, where the tire will bed.

I was looking to go 18 front 19 rear. What about the supposed 19x11? I'm guessing there 19x10.5 as well? I'd guess its safe to assume the 19x12 is a 19x11.5 if they measure them the same way? (sorry for all the questions.)

**Eugenio_SS** · 06-08-2008, 06:11 PM

the size of the rim is usually stamped on the inside of the wheel on the back of the spokes.

Stock wheel sizes are:
C6 front: 18x8.5 +56mm offset; rear: 19x10 +79mm
C6-Z06 front: 18x9.5 +40; rear: 19x12 +59mm

I know the 18s I have are 18x10.5 but those are aftermarket, not GM wheels.

**Selride** · 06-08-2008, 07:52 PM

I have 18x9.5 on all four. And they are 9.5" inside lip to inside lip. I can't vouch for the 11's though.

I took A LOT of measurements before mounting them, they have the same centerline as the SS 10-spokes, they're just fatter 1/4" on each side.