Results 1 to 5 of 5
Thread: Will they rub?
-
04-30-2015, 05:23 AM #1
- Join Date
- Aug 2014
- Location
- Wood dale, Illinois
- Posts
- 33
Black
Will they rub?
Was Guna purchase a set of C5 rims staggered. 17x9.5 front 54 offset and 18x10.5 rear 56 offset...was going to do the 315/35 18 for rear anyone have rubbing issues? I have a 02 ws6
-
05-03-2015, 07:04 PM #2
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
Someone will chime in. I think all you need to do is the BFH/Big Friggin Hammer mod to clear your rear inner fenders and trim your rear bump stops to keep the rears from rubbing.
-
05-04-2015, 05:30 AM #3
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 39
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
BFH mod will be needed with 315s and the rear bump stops will have to shaved down. I didn't need to do the BFH with 295/35/18 but I did have to trim the bump stops.
Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.
-
05-04-2015, 06:32 AM #4
Fyi. There are not very many 315/35 18 tires out there. A few drag radials is what you'll find.
You'll find more options in a 305 or 295Last edited by chuckie669; 05-04-2015 at 06:34 AM.
-
05-07-2015, 04:24 PM #5
You'll need a spacer for the rear....and lots of hammering.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks