Wheels Camaro Corvette C6

**CorvetteZ06C5** · 07-12-2007, 03:29 PM

Will stock C6 wheels Z06 or Base fit on a 2000 z28 camaro? If so what tire size will work with out any modifaction modification?

**Anthracis** · 07-12-2007, 08:03 PM

I don't think they fit if they came directly off a corvette. I thought I read on this forum that they are not an exact match. Do a search and it will come up.

**schrysler** · 07-13-2007, 06:49 AM

They Will "fit" But The Offset Is Wrong. They Will Need Spacers

**CorvetteZ06C5** · 07-13-2007, 01:03 PM

how big and what would u recommend

**schrysler** · 07-13-2007, 05:38 PM

There is a guy around here that did them on a 95ish firebird.......at least an inch to an inch and a half. But it just looked off on the back not the front. I will do a little research and find it for you.

**CorvetteZ06C5** · 07-13-2007, 06:09 PM

ok sweet thanks

**clg82** · 07-14-2007, 09:29 PM

My c6 zo6 rims fit on my car perfectly without any spacing issues, see my signature for my rim and tire sizes.

**Eugenio_SS** · 07-14-2007, 09:55 PM

i have the C6 wheels...

**CorvetteZ06C5** · 07-15-2007, 09:11 AM

im talking about oem not aftermarket

**Eugenio_SS** · 07-15-2007, 01:06 PM

they have the same dimensions and offsets... so they'll fit oem or aftermarket.

**Smkn_TA** · 07-15-2007, 01:36 PM

Eugenio, noticed you have 315's all the way around, isn't that a little hard on a power steering pump, it was never designed for anything greater than 275's I should imagine.

**schrysler** · 07-16-2007, 06:19 AM

and dont you have 18s all the way around, its the 19s on the back that are going to be the problem

**02ultraZ** · 07-16-2007, 12:36 PM

Originally Posted by schrysler

There is a guy around here that did them on a 95ish firebird.......at least an inch to an inch and a half. But it just looked off on the back not the front. I will do a little research and find it for you.

I think the 95 birds and newer camaros are different in the back... I could be lying...

**CorvetteZ06C5** · 07-16-2007, 12:36 PM

can u just put base c6 oem wheels that are 18" all the way around becuase i think the offset for the front is like 58mm or something????

**mrr23** · 07-17-2007, 07:26 PM

Originally Posted by CorvetteZ06C5

Will stock C6 wheels Z06 or Base fit on a 2000 z28 camaro? If so what tire size will work with out any modifaction modification?

http://www.ls1.com/forums/showthread.php?t=57126

i answered here. locking this one as you have two threads going on about this.

**Eugenio_SS** · 07-18-2007, 04:02 AM

Originally Posted by Smkn_TA

Eugenio, noticed you have 315's all the way around, isn't that a little hard on a power steering pump, it was never designed for anything greater than 275's I should imagine.

nah... it's ok... following the same reasoning, the rear was never designed for anything bigger than 275, right ?
Our cars like wide tires in the front if you think cornering is important.
Actually, you can easily fit 335s in the front while struggling to get 335s in the rear, needing flaring back there.