Results 1 to 6 of 6
Thread: What mods are needed?
-
07-04-2006, 08:16 AM #1
What mods are needed?
I am about to put an eibach pro kit on my car with the bilstein shocks and a new set of C6 z06 wheels. I was wondering what mods, if any, i would have to do to fit 19" x 10" wheels in the rear with an offset of +56mm.
-
07-04-2006, 09:56 AM #2
I don't know much about fitting the wheels and tires. The combo looking at is as follows:
19x10: Offset: +56mm Backspace: 8 5/8 inch (Rear)
18x9.5: Offset: +40mm Backspace: 6 7/8 inch (Front)
If they will fit, what size tire will i need after adding the pro kit and shocks.O2' 420hp T/A [SIGPIC]
-
07-04-2006, 06:18 PM #3
- Join Date
- Jun 2002
- Location
- Montreal, CANADA
- Age
- 49
- Posts
- 3,190
triple-black- 2000 CamaroSS convertible
those wheels will fit nicely with those offsets.
as for tire sizes, well... I would go with the following:
275/35-18 (front) OD= 25.58"
285/30-19 (rear) OD= 25.73"
ps: stock OD= 25.66" and note that both sizes are within 0.5% off. (ie error in speedo is < 0.5mph @ 100mph)
not only will the overall diameter (OD) be good (ie doesn't affect the speedo + ABS) but the tires are also great size for properly mounted on the rim sizes.
275/35-18 fits on 9.0-11.0 wheels (best mounted on 9.5)
285/30-19 fits on 9.5-10.5 wheels (best mounted on 10)
btw, which bilstein are you thinking on getting for the prokits ?Last edited by Eugenio_SS; 07-04-2006 at 06:33 PM.
Eugenio_SS
almost stock triple-black 2000 SS convertible with 17x11s on all 4 w/ 315s at the track or on the street with 18x10.5s on all 4 w/ 315s: (1), (2)
-
07-05-2006, 09:47 AM #4
Im getting the bilstein BTS shocks to go along with the eibach prokit.... and thanks alot for the help with the fitments.
-
07-07-2006, 08:17 PM #5
- Join Date
- Jun 2002
- Location
- Montreal, CANADA
- Age
- 49
- Posts
- 3,190
triple-black- 2000 CamaroSS convertible
i'd not go with the BTS... they suck... if anything, Bilstein HD are decent, even if meant for stockish spring rates.
what's your shocks budget ?
-
07-09-2006, 07:56 PM #6
- Join Date
- Jan 2006
- Location
- T-Town
- Age
- 43
- Posts
- 97
silver- 02 Pontiac Trans Am WS6
I dont have the shocks but do have the Prokit and 19x11 in the rear and only minor massaging was needed to fit. Without it, would only rub with weight in the back or accelerating around a bumpy curve.
eddie2002 Trans Am WS6 408ci Stroker Motor
150 Shot NOS Pacesetter Long Tubes
Magnaflow Exhaust Eibach Prokit
19x10 fronts, 19x11 back CCW Wheels
(2) 12 Kicker Squares 1400watt Kicker 2 channel
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Are mods needed for superchargers or turbos?
By thomasterrible in forum Firebird / WS6Replies: 5Last Post: 07-19-2010, 01:51 AM -
Mods needed to add a roots type blower?
By WS.SICK in forum Forced InductionReplies: 15Last Post: 04-21-2010, 12:41 PM -
$2000 on suspension mods or on motor mods??
By greatwhiteZ28 in forum Suspension and HandlingReplies: 6Last Post: 09-27-2007, 06:04 AM -
Did a Few Exterior Mods, Opinions Needed! (Pics).
By Blown Interceptor in forum Western MembersReplies: 21Last Post: 03-26-2006, 08:21 PM -
suggestions needed for mods...
By SmokinSS in forum Internal EngineReplies: 8Last Post: 10-04-2005, 02:46 PM
Bookmarks