TTM 315's question
This is a discussion on TTM 315's question within the Wheels and Tires forums, part of the General Help category; hello i just bought a new set of ttm's the rear are 17x10.5 with a offset of 44. i was ...
03-16-2010, 06:43 AM #1
TTM 315's question
hello i just bought a new set of ttm's the rear are 17x10.5 with a offset of 44.
i was wondering how many people ran 315's on them and if it will rub. I am either going to get 315 35 17 555r or 555 extreme. I know the 555r run a little narrow but i would rather not do BFH mod lol. so have any of youu put 315's on with outa problem with these rims thanks..1999 black T/A. bolt ons; headman headers, slp ram air set up and lid, performance ss MAF, slp LM2, Hotchkis suspension, pro 5.0 shifter, other mods to come.
03-16-2010, 07:20 AM #2
03-17-2010, 11:11 AM #3
- Join Date
- Jan 2008
- heart of dixie
06 Jeep Grand Cherokee.
- 02 superchipsZ28 M6(sold)
on mine to with no probem
03-17-2010, 12:33 PM #4
i think 315's are fine as long as you dont lower the car
03-18-2010, 06:09 AM #5
alright thank you, i went with the nitto 555r's they should be in any day. i went with them since i have read they run a bit smaller. but the rims and tires should be in by the weekend, i hope so.. i will post up my results when i get them on.
03-18-2010, 06:31 AM #6
Another quick question do you guys have the adj. panhard bar? I have the adj lca's but not panhard bar. What exactly does it do? does it move the rear axle from side to side and will i only need it if one of my tires rub? thanks
03-23-2010, 04:55 AM #7
update.... i got my new rims and tires on over the weekend. Every thing fit great the nitto 555r do not rub at all and i have hotchkis springs on it also. just thought i would share.
03-23-2010, 09:01 AM #8
so 315's lowered didnt rub?? i was going to do the same thing but wanted to hear from people who have done it already
03-23-2010, 04:39 PM #9
- Join Date
- Aug 2005
- Urbandale, IA
- 2002 Trans Am WS6 (M6)
I have 315's in and don't have any rubbing issues. My car is lowered and running a moser 9 inch.
03-24-2010, 06:36 AM #10
yep thats right i have 315 nitto 555r on with the hotchkis lowering springs, and they fit great no rub. The offset for my rear wheels were 44.
04-22-2010, 04:43 PM #11
I've got 315 Sumitomos on 10.5 or 11 TTIIs along with 1.5" Eibach Pro-kit. No rubbing under normal driving conditions. However, I have made minor contact when going around a right hand curve at 65mph and hitting a moderate bump. I'd imagine you'd experience problems with some rear passangers and hard driving.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jinxeng in forum General HelpReplies: 4Last Post: 06-24-2006, 05:30 PM
By cjg454ss in forum NitrousReplies: 1Last Post: 06-21-2006, 08:51 AM
By schtick in forum Internal EngineReplies: 4Last Post: 05-16-2006, 05:49 PM
By BigDz95Camaro in forum Forced InductionReplies: 2Last Post: 04-04-2006, 11:24 PM
By NeeD4SpeeD in forum Wheels and TiresReplies: 28Last Post: 03-03-2006, 08:37 AM