tires

**ss2000** · 03-02-2009, 02:53 PM

Hey everyone need a little help. can i put a 315/30/18 or even 315/35/18 on rear of 2000 camaro with no problems when lowering the car 1.5 inch eibach springs.i have 10.5 rim didnt go 305 because i like the wider tire. help woud be appreciated. And does anyone know where i can get ss stitched in my seats.

**side2000** · 03-02-2009, 03:31 PM

you're probably gonna have to roll the lip on the quarter panel/fender well. they tend to shred your tires once you stick some 315's on. you need a buddy to move car back and forth while you roll the lip. . . . .

-you prob have to cut the bat down a little so you can use the thinner part toward handle. . . . . .
-stick the bat between the tire and the quarter panel and let it roll between as your buddy moves car back and forth. keep moving the bat toward you slowly so the fatter part is doing the rolling.
-if you do this slow enough you won't flake any paint. being warm outside also helps.

**ss2000** · 03-02-2009, 05:42 PM

Thanks for the reply.what if I just stick with 305 will I have the same problems and if so what is the widest I can go without cutting and customizing things.

**side2000** · 03-03-2009, 07:54 AM

i dunno about a lowered car but 305's and even 315's will fit a stock ride height f-body. the fender "roll" trick is easy and worth doing in my opinion. . .but i think you could prob get away with a low pro 305, ive had 315's on my car (with rolled lip) and mine is slammed to the ground.