Rim help

[WetSpot]

Will stock corvette wheels fit on camaros?..... I found these wheels 18x9.5 inch and 18x10.5....Offset= 57mm/58mm. Bolt pattern is 5x4.75. I want painted silver ten spoke zo6 wheels and am having a hard time finding any. I could go with the 18x9.5 with the 57mm off set on all four if need be .
Thanks for your intrest in my dilema......Wet.

[Blue28]

the 18 x 10.5 +58 offset wheels will probably need the bumpstops trimed, and the B.F.H. mod to the rear inner fenders!
Or you can go with 1/4" spacers on the rear and 1/2" up front (both on new longer ARP studs).
I don't see the 18 x 9.5 +57 offset wheels being a problem at all!

[WetSpot]

So stock corvette wheels will fit as long as there 18x9.5 with an offset of + 57

[Blue28]

+58 to +38 offset with a 9.5" wide wheel: 17,18,19 inch wheel height does not matter.

[Eugenio_SS]

both will fit perfectly and ideally, you'd put a 1/4" spacer.
I run 18x10.5 on all 4 corners with 315/30-18 on them for the street.
Just make sure your studs are long enough to take the spacers.