oem Z06 wheels

**Dr.Crash** · 09-04-2006, 07:19 PM

i just bought a set of 02 oem z06 wheels, and when i went to put the rears on and take it on a test drive then started to rub. what do i need to do? do i need to hammer in my wheel well? or is they a spacer i need. thanks

**Eugenio_SS** · 09-05-2006, 02:12 PM

BFH does the job... for sure it rubs on the 9h50 location on the driver side and the 2h10 on the passenger side...
just massage it with a big hammer... should be fine after that, unless your rear-end is not centered.

**Dr.Crash** · 09-06-2006, 08:42 PM

Originally Posted by Eugenio_SS

BFH does the job... for sure it rubs on the 9h50 location on the driver side and the 2h10 on the passenger side...
just massage it with a big hammer... should be fine after that, unless your rear-end is not centered.

well i did it. seems ok. im gonna drive to work tomorro and see what happens. i've got my fingers crossed. thanks again