Nitto Invos and 400RWHP?

**tg580** · 05-05-2010, 02:50 AM

I currently have Nitto Invo 295/35/18 tires. After i'm done with my mods I should be around 400RWHP. I putting in a 3200 stall and 3.73's. Do you think these tires will be ok or am I going to have to get something stickier?

**00z28bubba** · 05-05-2010, 03:25 AM

hell with that you wont even be able to run 555r's if your going to the track or for a dig race. mt et streets ftw

**shady milkman** · 05-05-2010, 07:13 AM

the invos are big in the vette community ....they put them on their z06s .......nuff said

**00z28bubba** · 05-05-2010, 02:44 PM

then again he hasnt stated what he is using them for. is it street play, track play, or dd?

**tg580** · 05-05-2010, 04:32 PM

not a daily driver and wont see the track. Just waiting for the unsuspecting Vette driver at a stop light.

**RJWZ28** · 05-07-2010, 07:33 PM

Then I think you have your answer

**c5z28** · 05-07-2010, 08:52 PM

They rated the invos pretty low in car and driver-search there page under summer tires.

**67CamaroRSSS** · 05-07-2010, 09:14 PM

Ever seen the Cheech and Chong movie "Up in Smoke"?

**c5z28** · 05-07-2010, 09:15 PM

personal experience?

**RJWZ28** · 05-08-2010, 02:37 AM

My personal interest in Nitto tires was the NT05, to be honest. But a lot of C6Z06 guys DO run the Invo.

**LS2Tuner** · 05-08-2010, 08:38 AM

If you enjoy sitting and spinning they will work Great!

M & H makes a Very good 18" drag radial that will be your Best choice hands down.

**tg580** · 05-08-2010, 03:16 PM

Who makes M&H? I've never heard of them.

**LS2Tuner** · 05-08-2010, 04:46 PM

http://www.mandhtires.com/store.php?...mode=cat_click

**blackSS01** · 05-08-2010, 07:09 PM

Originally Posted by LS2Tuner

http://www.mandhtires.com/store.php?...mode=cat_click

Hey.....that Cobra is missing a headlight from all the traction

**RJWZ28** · 05-08-2010, 08:04 PM

May wanna check the blower to see if the shards of headlight are stuck there LOL

**tg580** · 05-09-2010, 09:39 AM

Originally Posted by LS2Tuner

http://www.mandhtires.com/store.php?...mode=cat_click

I take it that you've used them and like them?

**LS2Tuner** · 05-09-2010, 11:49 AM

Originally Posted by tg580

I take it that you've used them and like them?

YES on Many cars. I have seen 1.52 60' on a 325/40/18.
They have been making cheater slicks since the late 50's early 60's.

**blackSS01** · 05-09-2010, 07:43 PM

Originally Posted by LS2Tuner

YES on Many cars. I have seen 1.52 60' on a 325/40/18.
They have been making cheater slicks since the late 50's early 60's.

How long do they last "Roughly"

**LS2Tuner** · 05-09-2010, 08:16 PM

Originally Posted by blackSS01

How long do they last "Roughly"

No way to answer that really. I have customers that get them to last 8 months and others that only last 2 months. WAY TOO Many variables!! Driving habits, street conditions, ambient temps., air pressure, axle alignment, etc.

They are a Soft EXCELLENT working drag radial. You can do wheel stands with 18"s. That is all I can tell you.

**blackSS01** · 05-09-2010, 08:26 PM

Originally Posted by LS2Tuner

No way to answer that really. I have customers that get them to last 8 months and others that only last 2 months. WAY TOO Many variables!! Driving habits, street conditions, ambient temps., air pressure, axle alignment, etc.

They are a Soft EXCELLENT working drag radial. You can do wheel stands with 18"s. That is all I can tell you.

I know all the variables would make it difficult to answer. Your 8/2 month helps enough tho. I'll give them a try when I get tires. Won't be for a while yet but they have good prices on them.