Results 1 to 13 of 13
Thread: 315?
-
12-11-2011, 03:24 AM #1
- Join Date
- Apr 2009
- Location
- Tyler TX
- Age
- 34
- Posts
- 516
Navy Blue Metallic/Black- 02 camaro z28/01 wife t/a
315?
can i fit a 315 tire on a 10.5 rim? i just sold my camaro c5 rim's and im trying to buy black TT 17x9 up front with 275 & 17x10.5 out back. I want to get 315 mickey thompson street radials out back. Is it possible?
-
12-11-2011, 03:34 AM #2
Yes you can!cause I did.. But I wouldn't go any wider on that wheel size
-
12-11-2011, 10:10 AM #3
- Join Date
- Apr 2009
- Location
- Tyler TX
- Age
- 34
- Posts
- 516
Navy Blue Metallic/Black- 02 camaro z28/01 wife t/a
yess!! thanks will do, also can 305 fit on a 18x9.5 rim? even if is tight??
-
12-11-2011, 10:26 AM #4
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
I had a 285 on 9.5 it was kinda wide for that rim.
315s should fit perfect!
-
12-11-2011, 11:42 AM #5
- Join Date
- Feb 2010
- Location
- Greenwood, IN
- Posts
- 3,508
Light Pewter Metallic- 2001 Camaro SS
Those will fit just fine on the rim. Not sure if you will have to make any modifications to get them to fit in the wheel well though.
-
12-11-2011, 07:27 PM #6
- Join Date
- Apr 2009
- Location
- Tyler TX
- Age
- 34
- Posts
- 516
Navy Blue Metallic/Black- 02 camaro z28/01 wife t/a
with my luck i'm prob going to have to pound the wheel well or grind it, i guess will see, thanks guys
-
12-11-2011, 07:35 PM #7
-
12-12-2011, 02:04 AM #8
- Join Date
- Apr 2009
- Location
- Tyler TX
- Age
- 34
- Posts
- 516
Navy Blue Metallic/Black- 02 camaro z28/01 wife t/a
is 44 i think
-
12-12-2011, 02:14 AM #9
i have TT on my car with nitto 315s. if your car is stock height your going to have issues around the bump stop and the wheel. if you lower it you will clear but get an on car adj panhard rod. depending if you go that route you may have to roll your fenders depending what springs you put in.
2002 Camaro Z28, A4, MS4 cam, underdrive pulley, Pacesetter LTs with ORX true duals
2000 Camaro SS, M6, SLP LTs with ORX true duals
-
12-12-2011, 07:26 AM #10
- Join Date
- Apr 2009
- Location
- Tyler TX
- Age
- 34
- Posts
- 516
Navy Blue Metallic/Black- 02 camaro z28/01 wife t/a
is stock height, what did you do to fix the problem? you can pound it with a rubber hammer rite? or grind it?
-
12-12-2011, 08:12 AM #11
i lowered my car for it to clear but on my RS i had the zr1 11 rims and i used a 5 pound hammer and beat it back a little ways just to keep the lip from snagging on it.
-
12-12-2011, 08:30 AM #12
- Join Date
- Feb 2010
- Location
- Greenwood, IN
- Posts
- 3,508
Light Pewter Metallic- 2001 Camaro SS
My 18s with an offset of 45 fit 315s while being lowered without issue.
-
12-12-2011, 06:51 PM #13
- Join Date
- Apr 2009
- Location
- Tyler TX
- Age
- 34
- Posts
- 516
Navy Blue Metallic/Black- 02 camaro z28/01 wife t/a
well will see how it goes, hopefully i wont have to do major work on it. ill keep ya posted, thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks