19x12?

[lineybiker_11]

Do you think you could get a set of 19x12 inch rims on the back of a 02 ws6 with no major mods like a mini tub which still isn't out of the question. What suspension mods would i have to do and what would i have to do to the wheel well besides putting in the tub?

[Eugenio_SS]

yeah... Here is 17x12" wide rims on all corners (and taller tires too vs stock):
http://rides.webshots.com/album/114841935vFSrrJ

You'll have to make sure your offset is correct to not have rubbing in the inside, and you'll have to flare a bit the rear pannel.
If you put 12" wide in the front... you'll have no issues w/ decent offset.

[lineybiker_11]

thanks, would you happen to know what the offset should be close to. the ones i'm looking at are 19x9.5 40mm front and 19x12 59mm rear

[Eugenio_SS]

you should be in the +35mm to +38mm range of offsets if you don't want a spacer on the 19x12... and you still need to flare the fender.
w/ the given offset, you'd want to use a 1" spacer/adapter.
I'd put the 19x12 on all corners

[lineybiker_11]

wouldn't be bad if there was a place to auto x but theres not anywhere close i'm more of a straight line guy with the occasional pass through the twisties