19" C6 on my T/A!

**T/A36** · 06-04-2007, 06:07 PM

Im wanting to get 19x10s all the way around, but im not so sure they are goin to fit and i dont want them to stick out. Does it have to do with the offset. What offset do i need? Anything would help! Thanx

Travis

**nitrobusa** · 06-04-2007, 06:41 PM

Originally Posted by T/A36

Im wanting to get 19x10s all the way around, but im not so sure they are goin to fit and i dont want them to stick out. Does it have to do with the offset. What offset do i need? Anything would help! Thanx

Travis

Travis, I just bought a set of 19x11 rears and 18x9.5 fronts 06 c6 replicas for my z. The front fit fine but the rear would not come close. I would have to used some major sapcers for it to work. We also tried them on my brothers WS6 and it was the same way. His car has been lowered and it was actually worse. I would try the 18in instead of the 19's. Its your call but good luck with the outcome. You also need to think or the power that the 19s are going to rob from your car.......... Thanks Chad

**T/A36** · 06-04-2007, 06:43 PM

Yea i had a feeling the wouldnt fit but i have seen them on before. I think the offset has something to do with it.

**nitrobusa** · 06-04-2007, 06:45 PM

Your going to need a big sledge hammer to modify the inner wheel well. I dont know about you but I'm not beating the shit out of my car for some dang wheels...............

**T/A36** · 06-04-2007, 07:16 PM

What was the offset on yours? Where did you buy them?

**T/A36** · 06-05-2007, 07:35 AM

Anyone?

**mrr23** · 06-05-2007, 11:22 AM

i have the factory C6 18/19 on my car. the rears really need a 1" spacer to fit properly. i banged the inner fenderwell to get them to fit with 275/35-19 tires.

**T/A36** · 06-05-2007, 07:02 PM

Whats a spacer do and where can i get one?

**mrr23** · 06-05-2007, 07:03 PM

pushes the wheel outward. actually it would be an adapter at that thickness. www.skulte.com

**Eugenio_SS** · 06-07-2007, 04:19 AM

i have 18x10.5" C6 wheels for street on all corners and none stick out.

**Smokaholik** · 04-01-2009, 09:47 PM

i want 19x10's in the rear.What size of wheel adaptors would i need?

**b.lee** · 04-03-2009, 03:31 PM

BFH Mod to the inner fenders.
I had to with my 18" C5 Thinspokes.
Fugg a spacer.

**mrr23** · 04-03-2009, 06:34 PM

Originally Posted by Smokaholik

i want 19x10's in the rear.What size of wheel adaptors would i need?

refer to post #7 in this thread i made.

**KarenCaren** · 04-06-2009, 05:06 PM

Let me try this setup myself. I want to know if it will stick out if I use 19"s. My buddy got 19"s i'll borrow it from him.

_______________
If you ain't first your last!
dragdreams