Results 1 to 10 of 10

Panhard bar Dress up

This is a discussion on Panhard bar Dress up within the Appearance Section forums, part of the General Help category; Dunno if anyones really going to care about this but i got bored the other day so i pulled my ...

  1. #1
    Stockitie Stock Stock 95camaroZNC's Avatar
    Join Date
    Jun 2008
    Location
    Raleigh NC
    Age
    30
    Posts
    897

    Red
    1999 Trans Am

    Panhard bar Dress up

    Dunno if anyones really going to care about this but i got bored the other day so i pulled my Panhard bar because i had a neat idea to put a z-28 Emblem on it and this is pretty much how it all went down.

    Cell phone pictures for now so bare with.












    I think it turned out pretty neat. I pretty much found a picture of a emblem from a 70s 80s Camaro and printed it out about the size i thought i needed. Cut the center parts out. Then used a glue stick to glue it to the panhard bar and painted over the open sections in my ghetto stencil. After it dried i went at it with a wet wash cloth and a very sharp knife thats in the pictures to get rid of all the glue after i pulled the stencil off as well as scratch off all the extra paint. It ended up looking like it does in the last two pictures. I have since gone over it with hair spray then i polished and waxed it. Ill be going for some clear coat to go over it before i put it back in the car.

  2. #2
    400rwhp::370rwtq Lucky 13's Avatar
    Join Date
    Mar 2007
    Location
    Little Elm, TX
    Posts
    343

    Black
    2002 T/A WS.6 -- ASC#12

    hair spray?!?!? why?

  3. #3
    Stockitie Stock Stock 95camaroZNC's Avatar
    Join Date
    Jun 2008
    Location
    Raleigh NC
    Age
    30
    Posts
    897

    Red
    1999 Trans Am

    Coats it like if you paint something and itll keep it from fading or coming off until i can go nab some clear coat. It flakes off pretty easy.
    Last edited by 95camaroZNC; 05-08-2009 at 12:11 AM.

  4. #4
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Quality looks good, get an aftermarket panhard though
    CCW SP 500s 18x10 275/35 18x11 295/35
    SLP CME with GMMG style catback
    Painted manta stripe

    Quote Originally Posted by konigandy6 View Post
    I'd rather be bi than full homo!!!!

  5. #5
    Stockitie Stock Stock 95camaroZNC's Avatar
    Join Date
    Jun 2008
    Location
    Raleigh NC
    Age
    30
    Posts
    897

    Red
    1999 Trans Am

    *shrug* just something im messing arond with, the old one broke out of the car and i have enough stuff still sitting around that needs to go in, ive had a set of subframe connectors for a month now i havent gotten put in.

    Hopefully their going in tomorrow if the guy can get around to welding them in for me. Also have a aftermarket panhard thats in the car right now, lol i drive it everyday cant drive around without that >_<.
    Last edited by 95camaroZNC; 05-08-2009 at 12:12 AM.

  6. #6
    Detailing + Design third_shift|studios's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Age
    36
    Posts
    21,719

    My life is a
    Ben Stiller movie.

    would have gone with vinyl personaly but hey, whatever keeps ya busy

  7. #7
    Rockin the Ruckus! 02Sweet's Avatar
    Join Date
    May 2008
    Location
    Line Lexington, PA
    Posts
    2,670

    NBM
    2002 z28 camaro

    I like it. I do odd shit like that all the time. It's called a.d.d. work, its an idea that you run with and your happy with it. I personally like it I would honestly do it to my car. But the only issue I have is why would you do that before the sfc?

  8. #8
    515 HP TrickFlow Package BADASS2000SS's Avatar
    Join Date
    Feb 2008
    Location
    Palm Beach, FL
    Age
    40
    Posts
    1,702

    440 RWHP / 410 TQ
    2000 SLP CAMARO SS

    Nice job, looks good!
    2000 SLP Camaro SS M6 * 515 HP TrickFlow Package * FAST 92 MM Intake * Nick Williams 92 MM TB * Volant CAI * Granatelli MAF * Full Custom True Dual Exhaust with X-Pipe * Tuned by Breathless Performance

  9. #9
    Stockitie Stock Stock 95camaroZNC's Avatar
    Join Date
    Jun 2008
    Location
    Raleigh NC
    Age
    30
    Posts
    897

    Red
    1999 Trans Am

    Quote Originally Posted by 02Sweet View Post
    I like it. I do odd shit like that all the time. It's called a.d.d. work, its an idea that you run with and your happy with it. I personally like it I would honestly do it to my car. But the only issue I have is why would you do that before the sfc?
    I have them i just cant weld, unbolting stuff i can do lol.

  10. #10
    Rockin the Ruckus! 02Sweet's Avatar
    Join Date
    May 2008
    Location
    Line Lexington, PA
    Posts
    2,670

    NBM
    2002 z28 camaro

    Quote Originally Posted by 95camaroZNC View Post
    I have them i just cant weld, unbolting stuff i can do lol.
    I got bolt in sfc. I have access to a welder and have learned from messing around and wasting time. The things you can do go ahead and have fun with. I understand the hang ups I go through them all the time. I started with the "easy" stuff first. Keep up the good work learn as you go.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. engine dress up
    By JayTA98 in forum Appearance Section
    Replies: 24
    Last Post: 03-06-2011, 07:16 PM
  2. dress up
    By ls1speedster in forum Appearance Section
    Replies: 7
    Last Post: 12-31-2007, 10:47 PM
  3. How can I dress up a white 02 WS6
    By axcellclan in forum Firebird / WS6
    Replies: 14
    Last Post: 09-09-2006, 11:10 PM
  4. My new Engine dress-up...
    By graphicsgod in forum Appearance Section
    Replies: 1
    Last Post: 04-28-2006, 11:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •