Fogged Healights

**BWA2110** · 08-15-2006, 12:20 PM

Does anyone have and tips or tricks for getting fog off of the headlights. I heard you can wet sand them and then spray clear. Anything else out there?

**Redphoenix1998** · 08-15-2006, 01:25 PM

I saw this product once, I don't remember the site though. But it works, I've seen the results on a friends WS6

**SSG STEALTH** · 08-15-2006, 03:32 PM

Meguiar's PLASTX... It works, actually adds some of the oils and minerals back to the plastic. I have used it on all sorts of plastics, watches, etc.

TJ

**M6_Hurst_Z28** · 08-16-2006, 08:34 AM

You can take them off of the car & wet sand them with 1500-2000 grit sandpaper until the tiny cracks & cloudy spots are gone.Then clear coat them with a high quality clearcoat like PPG or Dupont. I did this to my 99 z & they look almost as good as new.

**snaggeltooth** · 08-16-2006, 09:02 AM

I am in the process of doing this to the MARK VIII, it has very big lens .. So I will keep you up to date .. I know the 1500 grit does a very good job , but is a slow go . Im going to use the Mc Guires on the other lens and see if there is any differince ...

**whitedevil** · 08-19-2006, 01:03 PM

http://www.ls1tech.com/forums/showthread.php?t=157192

I did the very same to my car today, and could not be more happy. I am too afraid to clear coat over mine, I also used Plastx instead of what this thread suggests, either one will work pretty good.

I went 400 allover, then 600, then 1500 for allmost a half hour each lense, then polished the hell out of them with the Plastx. Allmost new now, and mine were pretty haggered. Now, time for the Wistler mod....

**StangKiller615** · 08-23-2006, 01:27 PM

Originally Posted by BWA2110

Does anyone have and tips or tricks for getting fog off of the headlights. I heard you can wet sand them and then spray clear. Anything else out there?

Buffing them.

**99zhuggerz99** · 09-15-2006, 03:04 PM

mothers power ball. use any cutting solution, buffing compound, then buff them and they will shine, if not use wet sanding then above process. i work at a car dealership and this is how we refurbish used cars