Results 1 to 14 of 14
Thread: Did the Whistler Mod now...
-
11-30-2007, 04:42 PM #1
Did the Whistler Mod now...
I did the whistler mod 3 or 4 weeks ago and now the headlights are a little cloudy.
Would there be a away that i could get ridge of the haziness out of the inside of the headlight without having to re open the headlight?
-
11-30-2007, 05:01 PM #2
- Join Date
- Apr 2006
- Location
- yuma arizona
- Age
- 42
- Posts
- 2,020
silver- 1998 Z28
perhaps they were hazy before?? because i had no issues with the ones i did. and the haziness is usually on the outside. not on the inside.
-
11-30-2007, 05:16 PM #3
No before i did them they were crystal clear. And i know its on the inside because i used a polisher and plastic cleaner on the outside and it didnt clear it up.
Im guess condensation got in there even thought i thought i sealed them very well. So how could i get the condensation out of the light without taking it apart?
-
11-30-2007, 05:22 PM #4
is it like water on the inside? best but it to take them apart ones the mod is done its easyer to take them apart.
M6, Lid, Ported and Polished Throttle Body (By Me!), LT, Custom Catted Y, Electric Cutout, PHB, LCA13.21@108 with a 2.3 60'
-
11-30-2007, 05:51 PM #5
-
12-18-2007, 11:53 AM #6
probably condensation that dried and left a residue. Opening them is ur best bet. IMO
-
12-19-2007, 12:38 PM #7
Open the lights again and wipe off the film that is in there. Then reseal them again.
2002 Artic White SS 35th Wheels|Full Hotchkis Suspension|Koni SA|Magnaflow CME|SLP lid|www.fquick.com/The_Guz
-
12-26-2007, 05:41 AM #8
- Join Date
- Apr 2006
- Location
- Jeffersonville, Indiana
- Age
- 45
- Posts
- 796
Monterey Maroon Metalic- 2000 Z28
If there really is condensation in there you really have to open them up and let them dry. Maybe use a little caulk on the seals once the lense is seated to lock out moisture? I know my lenses benefited from a sandpaper and plastic polishing kit I bought at Auto Zone. Good luck!
-
12-26-2007, 09:51 AM #9
you can try to cut some of your sealer away so there is a hole and maybe it will evaporate then. and then you could seal it back up. or you could make a small hole inbetween the lense and somehow inject some windex in it and then let it drip out and evaporate too.
-
12-26-2007, 09:27 PM #10
WTF is the whistler mod?
-
12-26-2007, 09:37 PM #11
-
12-28-2007, 09:49 AM #12
does anyone have a upclose pic of this whistler mod??
Whisper Lid/SLP HarmonicBalancer/MAFTranslator/DiabloTuner A-Pillar Gauges (Aem Uego A/F,Trans Temp, D-Pic)Magnaflow CB w/CME Tips/ Eibach Pro Kit/ Brembo Cross Drilled/Slotted Rotors/ H.I.D.Kit
-
01-02-2008, 05:19 AM #13
-
01-02-2008, 10:43 AM #14
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Whistler's
By 01SuperSport in forum Parts Wanted / TradeReplies: 1Last Post: 01-30-2010, 06:26 PM -
whistler mod
By vonskeezy28 in forum Camaro / SSReplies: 4Last Post: 12-23-2009, 08:44 PM -
Whistler mod.........
By Y2KPewterSS in forum Appearance SectionReplies: 16Last Post: 04-21-2009, 07:28 PM -
whistler Mod
By Soltakr in forum Appearance SectionReplies: 6Last Post: 07-19-2008, 09:53 PM -
Whistler Mod?
By Vols Fan in forum Appearance SectionReplies: 10Last Post: 10-27-2006, 04:59 PM
Bookmarks