cracked my mid grund effex? can it be fiuxed? mud/fiber glass?

**greatwhiteZ28** · 04-30-2007, 06:22 PM

theres a 1.5 crack at the rear of my g effex kit. damm these car are low. its always been there i just want to know how i could fix it or if im forced to get at new one. you can barley tell if you look but like all oweners i CAN TELL. what material is it and what method should i use to tackle this?q

**SexOnWheels** · 05-01-2007, 06:40 AM

I would try an epoxy glue to seal the crack.

There should be a number of different adhesives you can use just depends what material your aftermarket "g effex kit" is made of.

**98redM6** · 05-01-2007, 08:59 AM

Is it kind of rubbery and flexible? If so it is more than likely polyurethane. If not it should be fiberglass. Fiberglass is repairable and so is urethane. Urethan is the more difficult of the two to repair and most people will tell you it can't be repaired but it can. You just have to find someone that can fix it.

**greatwhiteZ28** · 05-01-2007, 06:54 PM

Originally Posted by 98redM6

Is it kind of rubbery and flexible? If so it is more than likely polyurethane. If not it should be fiberglass. Fiberglass is repairable and so is urethane. Urethan is the more difficult of the two to repair and most people will tell you it can't be repaired but it can. You just have to find someone that can fix it.

well its the stock g effex that came with the car from the factory buts its the lil right corner right on the egde. i know i can see it but is about 2 inchs long and on the edge.

i just dont want it to keep getting bigger as i keep driving it