Results 1 to 4 of 4

Coil Pack relocation update

This is a discussion on Coil Pack relocation update within the Appearance Section forums, part of the General Help category; I've had this project in the back of my mind for a couple of years now. I've seen a kit ...

  1. #1
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Ugy Lower Corner of AL

    Navy Blue Metallic
    98 T/A w/a little mods...

    Coil Pack relocation update

    I've had this project in the back of my mind for a couple of years now. I've seen a kit that mounts the coils under the cowl but nothing for the wire harness. It required you to splice the harness and add extensions. I didn't like that. So this pretty much stayed on the back burner.

    Well this past weekend on SpikeTV they had a rerun of Extrem4X4 and the host was talking about LSx motors for rock crawlers and buggies.
    He came to the subject of moving the coil packs off the valve covers to protect from mud/water and that's when I really paid attention.

    Here's the solution I think will work well:

    Seems Painless Performance has made a LS Engine 24" Coil Extension Harness Kit, Part # 60127, for a set of 2 it cost about $119 plus shipping.

    Here is the link below. (I posted it because I know no sponsor sells anything like this.)

    Painless Performance: LS Engine 24" Coil Extension Harness Kit

    I know some other members here have had interest in this so I wanted to make sure you guys saw this. If anybody does do it, pls post some pics. I have other projects going on before I try this. I may do it when I do my H/C project.
    Last edited by SMWS6TA; 01-24-2012 at 12:28 PM.

  2. #2
    Member xssv's Avatar
    Join Date
    Sep 2010
    01 SS

    EXACTLY what I've been looking for....

  3. #3
    Junior Member BadbirdLS1's Avatar
    Join Date
    Jan 2012
    east brookfield

    bright red
    2000 Pontiac Trans Am WS6

    awesome find! i didn't want to cut up my wires either that's why i went with FRC's, but now this is on my list.

  4. #4
    Junior Member
    Join Date
    Oct 2009
    Augusta, GA


    This may help me clean my engine bay, Thanks!
    Last edited by 1chance; 01-24-2012 at 04:26 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts