Page 1 of 3 123 LastLast
Results 1 to 20 of 46

69z/28 emblems

This is a discussion on 69z/28 emblems within the Appearance Section forums, part of the General Help category; Just put 69 emblems on my car. I got the idea by looking at Jonb 's car. Sorry for the ...

  1. #1
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    69z/28 emblems

    Just put 69 emblems on my car. I got the idea by looking at Jonb 's car. Sorry for the shitty pics but the car is in my garage. I just bought new Baer rotors(no more rusty rotors) and clear corners,new headlights. I will take better pics when its all done. Here are a few for now.



    Last edited by LETHALxLS1; 11-11-2007 at 07:24 PM.

  2. #2
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    I love those emblems, always have. Looks good
    CCW SP 500s 18x10 275/35 18x11 295/35
    SLP CME with GMMG style catback
    Painted manta stripe

    Quote Originally Posted by konigandy6 View Post
    I'd rather be bi than full homo!!!!

  3. #3
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    wow those rotors look like shit!

  4. #4
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Quote Originally Posted by LETHALxLS1 View Post
    wow those rotors look like shit!
    You will have that fixed soon enough though

  5. #5
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Yes sir- I am actually waiting on my shocks cause it made sense to me to get rotors,pads, and shocks all at the same time along with the headlights and clear corners. I ordered some Bilsteins but they wound up being on backorder so I am prolly gonna go with KONIs now. Gonna get some really good pics when its all done. O-almost forgot my skull emblem from TT/S will be going on the rear finish panel and a 69 Z/28 stainless steel emblem to go on the new billit grill.

  6. #6
    Consumer of kraut SiggyZ's Avatar
    Join Date
    Dec 2006
    Location
    Tulsa
    Posts
    4,773

    Light Pewter Metallic
    y2k 8-cylinder catfish

    I've thought about doing that to my car. They sure do look good!

    2000 Chevrolet Camaro Z28 A4 - Light Pewter Metallic
    Direct Flo lid, SLP Loudmouth, Bassani Offroad Y-Pipe, BMR strut tower brace, BMR subframe connectors, shift points tune and !EGR

    2011 Kia Forte EX A6 Sportmatic - Titanium Silver Metallic

  7. #7
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Siggy with your red painted brakes and pewter met paint it would look awsome.

  8. #8
    Senior Member JonB's Avatar
    Join Date
    Sep 2006
    Location
    Florida
    Age
    33
    Posts
    1,458

    Black
    2005 GTO

    Looks good, I've converted yet another to the 69 emblems. Post some pics when you get everything else done it will be close to a clone of my car.
    05 PBM GTO
    Cold Air Inductions CAI,
    Relocated IAT with omega,
    Slp Predator tune,
    Flowmaster axle back with H pipe,
    Custom tuned TCM.
    BC Racing coil overs


    Sold 01 z28

  9. #9
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    yeah it should be pretty close -thanks for the idea man. Your car looked so kick ass I had to do it to mine. It had stainless z/28 emblems but those will be goin on egay soon.

  10. #10
    Consumer of kraut SiggyZ's Avatar
    Join Date
    Dec 2006
    Location
    Tulsa
    Posts
    4,773

    Light Pewter Metallic
    y2k 8-cylinder catfish

    Thanks, I think it would too. Okay, question from mister anal retentive here. How do you know, without a shadow of a doubt, that both logos are lines up perfectly on either side of the car?

    Quote Originally Posted by LETHALxLS1 View Post
    Siggy with your red painted brakes and pewter met paint it would look awsome.

  11. #11
    Consumer of kraut SiggyZ's Avatar
    Join Date
    Dec 2006
    Location
    Tulsa
    Posts
    4,773

    Light Pewter Metallic
    y2k 8-cylinder catfish

    Hmmmmm....just a quick PS sample.


  12. #12
    Senior Member JonB's Avatar
    Join Date
    Sep 2006
    Location
    Florida
    Age
    33
    Posts
    1,458

    Black
    2005 GTO

    Quote Originally Posted by SiggyZ View Post
    Thanks, I think it would too. Okay, question from mister anal retentive here. How do you know, without a shadow of a doubt, that both logos are lines up perfectly on either side of the car?
    The way I knew was when I took the stock emblems off there was an outline of dirt/glue. I removed all of it but the very bottom were the Z and 28 were then lined the new emblem up with it. With a q-tip, rag and go gone I removed the rest of the dirt/glue. This is assuming that they are lined up perfectly from the factory.

  13. #13
    United States Marine Kamauxx's Avatar
    Join Date
    May 2007
    Location
    Kansas City, MO
    Age
    35
    Posts
    382

    Blazen Orange Metallic
    2006 GTO

    Looks good. Where'd you guys find them?

  14. #14
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Quote Originally Posted by SiggyZ View Post
    Thanks, I think it would too. Okay, question from mister anal retentive here. How do you know, without a shadow of a doubt, that both logos are lines up perfectly on either side of the car?
    I took the old ones off w/ a hairdryer and fishing string (thanks Y2K). Took the rest off with wd-40. Washed it, buffed it with black LC pad and Pinnacle polish. For the first emblem I used blue painters tape and measured off the fender moulding with a piece of pre measured/cut cardboard (easier then trying to hold a tape measure it) tripling up the tape so the emblem had a ledge to rest on. Once I got that emblem on where I wanted it I took a piece of paper and made a template by lining it up with the line in the fender/door and sat it on top of the fender moulding and out lined where the emblem was then cut it out. I took that piece of paper to the other fender lined it up with the line in the door/fender and lined the bottom of the paper up by resting it on the moulding.Then I just put the emblem in that hole and wallah!
    Last edited by LETHALxLS1; 11-12-2007 at 09:28 PM.

  15. #15
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Quote Originally Posted by Kamauxx View Post
    Looks good. Where'd you guys find them?
    Ebay is where I got mine in a set.

  16. #16
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Quote Originally Posted by SiggyZ View Post
    Hmmmmm....just a quick PS sample.

    Click for full size
    that looks soooooooooooooooo good on your car!!!

  17. #17
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Quote Originally Posted by SiggyZ View Post
    Hmmmmm....just a quick PS sample.

    Click for full size
    The retros do look good Drew. What would you do about the rear one? You know how good the Berger panel looks on pewter

    I know you like them, but those amber turnsignals mess up your flow so badly IMO. Amber and pewter just don't mix IMO.

  18. #18
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    go with the clear turn signals bro- IMHO

  19. #19
    Consumer of kraut SiggyZ's Avatar
    Join Date
    Dec 2006
    Location
    Tulsa
    Posts
    4,773

    Light Pewter Metallic
    y2k 8-cylinder catfish

    I like the amber turn signals on my car but I am leaning towards these emblems. But, I do change my mind about like I do my underwear, so who knows. P, I'm not much for the Berger panel for my car. What other suggestions would you have if I did swap out the emblems?

  20. #20
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Quote Originally Posted by SiggyZ View Post
    I like the amber turn signals on my car but I am leaning towards these emblems. But, I do change my mind about like I do my underwear, so who knows. P, I'm not much for the Berger panel for my car. What other suggestions would you have if I did swap out the emblems?
    You could always keep the pewter panel, fill in the "Camaro" and center the Z28 emblem like Abe did with the marroon Z. I believe that is what Jon B did with his black Camaro as well, it looks great.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SS emblems
    By gambler in forum Camaro / SS
    Replies: 6
    Last Post: 01-17-2010, 10:53 AM
  2. Emblems
    By supercopone in forum Camaro / SS
    Replies: 6
    Last Post: 11-22-2009, 06:07 PM
  3. Ram Air emblems
    By muteki in forum Firebird / WS6
    Replies: 15
    Last Post: 09-19-2008, 11:45 AM
  4. Gto Emblems
    By GetSome04 in forum GTO
    Replies: 6
    Last Post: 05-10-2007, 07:39 AM
  5. Z/28 emblems
    By BowtieFever in forum Appearance Section
    Replies: 10
    Last Post: 03-26-2006, 04:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •