Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Thread: Tech Wax 2.0

  1. #1
    Senior Member 1MileCrash's Avatar
    Join Date
    Mar 2007
    Location
    Wisconsin Rapids, WI
    Posts
    2,852

    Black
    1999 Z/28 M6

    Tech Wax 2.0

    i haven't been happy with my 3M teflon wax for a while now so i decided it was finally time for a change. the 3M stuff went on easy enough...although it clumped up and i didn't like that...and it was a bitch to take off...even as a liquid wax. and a few days later you would see all these spots where i missed the wax even though it looked perfect when i was initially done.

    so today i finally said what the hell and i sprung for a bottle of maguires tech wax 2.0.

    liquid wax...goes on amazingly easy and smooth. i can't recall using a wax that applied so easily with a microfiber applicator pad before.

    taking it off...just as easy as applying it. i only needed one microfiber towel to 3M teflons 2 towels. it looks great too i must say. i'll try to get a couple pics if i can.

    honestly...i'm impressed with this stuff so far.

  2. #2
    Senior Member 1MileCrash's Avatar
    Join Date
    Mar 2007
    Location
    Wisconsin Rapids, WI
    Posts
    2,852

    Black
    1999 Z/28 M6

    here's the link to the photo album from today...

    http://www.motortopia.com/album/view...isconsin_river

    and here's a couple sample pics...




  3. #3
    Senior Member Z06-Goose's Avatar
    Join Date
    Jul 2005
    Location
    Colorado
    Posts
    3,268

    Avus Silver
    2007 Audi RS4

    You car looks awesome
    I've tried the original version of the Tech Wax. Great shine, but didn't last long at all
    I believe the 2.0 version is supposed to be more durable
    It's as good of a product as you'll find locally anywhere as far as Meguiars is concerned.
    I still think Duragloss is better for a locally available products (CarQuest has it)

  4. #4
    Senior Member 1MileCrash's Avatar
    Join Date
    Mar 2007
    Location
    Wisconsin Rapids, WI
    Posts
    2,852

    Black
    1999 Z/28 M6

    thanks.

    i'll keep an eye on how long it lasts here. i guess realistically i'm not too worried about it...it would just give me another reason to get out and wash and wax the car again...hahaha.

    i know at work a lot of people come in and want wizards and race glaze...neither of which we carry. we used to carry the 3M teflon but we got rid of that recently. unfortunately for a friend at work we also got rid of steps 1 and 2 in the meguires 3 step process. damn corporate crap.

  5. #5
    That guy thearborbarber's Avatar
    Join Date
    Nov 2007
    Location
    SoDak
    Posts
    892

    White over Red
    1991 Suburban

    I used tech wax about a month ago and it still looks good.

  6. #6
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    49
    Posts
    23,345

    Pewter metallic
    2000 Camaro SS

    Looks great

  7. #7
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,318

    BLACK
    Z/28 LS1

    Great job! Your car looks awsome! Very "wet" looking-especially the second pic.

  8. #8
    Senior Member 1MileCrash's Avatar
    Join Date
    Mar 2007
    Location
    Wisconsin Rapids, WI
    Posts
    2,852

    Black
    1999 Z/28 M6

    thanks guys.

    i did the girlfriends silver 04 cavalier today...got the same overall treatment...wash, clay, wax. got finished...stood back and admired...she called i was talking to her telling her how great it looked...and then it started sprinkling. haha...shit. oh well!

  9. #9
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,467

    Black
    1999 TA WS.6

    I JUSt got done waxing my car with the Tech 2.0

    Needless to say I applied way, way too much and I now need another microfiber to reomve the last very thin layer. I finished in the dark and pulled it into the barn. It looked pretty good, but it need the rest of the wax removed. Anything was better then what my car was starting to look like. Ill snap some pictures tomorrow as well for comparison.


    How do you guys clean the microfibers to get the wax out/off?

  10. #10
    Senior Member 1MileCrash's Avatar
    Join Date
    Mar 2007
    Location
    Wisconsin Rapids, WI
    Posts
    2,852

    Black
    1999 Z/28 M6

    just toss them in the wash by themselves with a little detergent and then dry them in the drier by themselves.

  11. #11
    Senior Member Z06-Goose's Avatar
    Join Date
    Jul 2005
    Location
    Colorado
    Posts
    3,268

    Avus Silver
    2007 Audi RS4

    Quote Originally Posted by Hi-Po View Post
    I JUSt got done waxing my car with the Tech 2.0

    Needless to say I applied way, way too much and I now need another microfiber to reomve the last very thin layer. I finished in the dark and pulled it into the barn. It looked pretty good, but it need the rest of the wax removed. Anything was better then what my car was starting to look like. Ill snap some pictures tomorrow as well for comparison.


    How do you guys clean the microfibers to get the wax out/off?
    If you apply the sealant or wax too thick, you're going to run into trouble. Best thing to do is spray some Quick Detailer to aid in removing it, you don't want to apply too much friction on the paint if you can help it

    Wash your MF towels with Woolite, separate from any other kind of laundry, and you should be fine. Don't use pwder detergent or softener
    I normally wash them thru a full cycle with woolite, and then run it again with no woolite to make sure all the suds and detergent residue are out as much as possible...

  12. #12
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,467

    Black
    1999 TA WS.6

    Well, I got mine all done. Its overcast today and I dont wanna take pictures I think it did a decent job. Def very smooth! 100x better then what it was. I wanna try out some of the higher end products sometime though.

  13. #13
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,467

    Black
    1999 TA WS.6

    I just polished the car really good with Meguirs Polish #7. It looks very good for over the counter stuff.

  14. #14
    Auto Painter RyanJM's Avatar
    Join Date
    Dec 2007
    Location
    Houston, TX
    Age
    47
    Posts
    2,002

    White
    1998 Trans Am

    I actually like Butter Wax they sell it at most major auto paint stores. Dupont and PPG. Easy on, easy off and real wet look shine.
    1998 Trans Am 85k miles.
    Bolt ons, MS3 113LSA cam, Circle D Stall, Tune, Modified WS6 style hood, Full Suspension, 6000k HID's, Clear Side Markers w/ Leds, Led 3rd Brake Light and 18" AR Staggered Killer Wheels w/ BFG KDW NT's.- Weekend Toy/DD
    02 Trailblazer -Sold
    09 Ram 1500 CC - Sold
    09 Cobalt SS/TC - Sold
    13 ram 1500 LoneStar CC 4x4 - Magnaflow, K&N,and more to come-DD/Toy

  15. #15
    Senior Member Z06-Goose's Avatar
    Join Date
    Jul 2005
    Location
    Colorado
    Posts
    3,268

    Avus Silver
    2007 Audi RS4

    Quote Originally Posted by Hi-Po View Post
    I just polished the car really good with Meguirs Polish #7. It looks very good for over the counter stuff.
    That's just a glaze and not a wax...

  16. #16
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,467

    Black
    1999 TA WS.6

    Quote Originally Posted by Z06-Goose View Post
    That's just a glaze and not a wax...
    I waxed before with the 2.0

    I then put the #7 on.

  17. #17
    Senior Member 1MileCrash's Avatar
    Join Date
    Mar 2007
    Location
    Wisconsin Rapids, WI
    Posts
    2,852

    Black
    1999 Z/28 M6

    well we had some rain last nite. and i must admit that the car was completely covered in pollen as it sits under a maple tree most of the time. the rain washed off virtually all of the pollen and there are next to no water spots even after drying in the sun this morning at work. i think that the wax had a role to play in both of the scenarios. of which i have not seen such happenings with other waxes that i have used. so two more points to the tech wax.

  18. #18
    Senior Member Z06-Goose's Avatar
    Join Date
    Jul 2005
    Location
    Colorado
    Posts
    3,268

    Avus Silver
    2007 Audi RS4

    Quote Originally Posted by Hi-Po View Post
    I waxed before with the 2.0

    I then put the #7 on.
    It goes glaze first and then the wax...

  19. #19
    Consumer of kraut SiggyZ's Avatar
    Join Date
    Dec 2006
    Location
    Jenks/Tulsa
    Posts
    4,798

    Light Pewter Metallic
    y2k 8-cylinder catfish

    Beautiful!

  20. #20
    Senior Member
    Join Date
    May 2009
    Location
    Toronto
    Posts
    1,083

    SOM
    2002 SS

    I've used zaino for 2 years now and think it's incredible. it lasts so so long. Looks wise, I hate to admit it but a meguiars cleaner and polish gives a deeper coat making the blue look darker which i liked better. Maybe its just in my head not sure but the zaino is shiny and durable. That black z looks like a mirror nice job.

    My Z will get the 28937918274092340932789 steps of zaino pretty soon. Can't wait to clay it and start fresh!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sema Show Tech Guide - Pontiac Tech
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 02-06-2010, 12:20 AM
  2. Reader's Tech FAQ - Tech Q&A
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 08-21-2009, 09:50 AM
  3. Sema New Parts Tech Guide Part 3 - Pontiac Tech
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 05-15-2009, 09:20 AM
  4. SEMA New Parts Tech Guide Part 2 - Pontiac Tech
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 03-30-2009, 08:40 AM
  5. SEMA New Parts Tech Guide Part 1 - Pontiac Tech
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 03-12-2009, 06:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •