stripping/erasing paint decals ?

[WS6S]

bought my son gold ta and bird decals for the center tail light on his ws6,problem is the red decals on there are paint not decals.any tricks to stripping or erasing them off without screwing up the plastic.

[tatertot91]

You can remove that piece and wetsand around 600-800 grit to remove the bird, then go up to about 2000 grit, then buff
Should get it out

[Z06-Goose]

bought my son gold ta and bird decals for the center tail light on his ws6,problem is the red decals on there are paint not decals.any tricks to stripping or erasing them off without screwing up the plastic.

That's a tough one, especially since it's plastic.
I would have to agree that wetsanding would be a better viable option. Don't use any harsg solvent or thing like that since it will destroy the plastic.
Wetsanding and then buffing will bring it up to par

I would start with 1000 grit first and see how that works. You can always go down to 800 grit if needed

[WS6S]

ok 10-4,thanks.,.

[tep98ws6]

i used one of those big erasers to get the yellow decals off my '72 SS, worked like a charm and cleaned up real easy but be gentle when doing it

[Y2KPewterSS]

Please do not post direct links to non sponsors