Black Mustang Supercharged!

**Z06-Goose** · 06-20-2007, 08:00 PM

I did this car a week ago for my friend Tommy who had a big Mustang show the following weekend, and wanted me to give it a little TLC

The paint was in pretty good shape, and needed little paint correction

Exterior
-Washed with Duragloss Car Shampoo
-Claybar with Dynamic Detailing Claybar and QD
-50/50 wipedown
-Menzerna PO85RD3.2 on bad spots
-Menzerna PO106FF on rest of the car followed by Menz PO85RD
-Prima Amigo -polishing pad
-Prima Epic Sealant -finishing pad
-Poorboys Natural Look and Wizard for Trim and Rubber
-Stoners Invisible Glass on windows

Interior
-Lexol two-step leather cleaner & conditioner
-Jeff Werkstatt Satin Prot vinyl protectant
-Adams Metal Polish #1 for the SS Door Sills

Engine
On the engine bay, I didn't really have the products and tools to do it right, but I took a stab at it
-JW Satin Pro and Poorboys NL on plastics
-JW Prime on painted parts
-Adams #1 Metal Polish on some aluminum parts

Wheels and Tires
-Westley's Bleche Wite Tire Cleaner dressed with PB NL
-Wheels degreased, and topped with Rejex

Seats: Before

Afters:

Engine bay

Exterior:
Prep work:
After wash and claybar and before pics:

After pics:
Passenger side:

Driver's side:

**Z06-Goose** · 06-20-2007, 08:01 PM

Outside shots:
Passenger's side fender reflection

**LETHALxLS1** · 06-21-2007, 01:42 PM

Nice work again!!

**440 rwhp trans am** · 06-21-2007, 03:07 PM

nice

**slowagon** · 06-22-2007, 01:45 PM

Masking tape!!! Ingenious! I would have never thought of that without seeing it. I always have problems with keeping wax/polish off my trim. Never again. Man thanks a million!! BTW great job on the Mustang your work is incredible.

**BIG D's SS** · 06-22-2007, 01:51 PM

Man that thing looks good. Nice work.

**jrc1122** · 06-27-2007, 01:39 PM

Nice ride! Nice detail job.

What kinda numbers is your car putting down?

**Z06-Goose** · 06-27-2007, 02:14 PM

Originally Posted by jrc1122

Nice ride! Nice detail job.

What kinda numbers is your car putting down?

I will find out for you later. I beleive is at the high 400 or low 500 at the wheels

**ls1speedster** · 06-28-2007, 07:52 PM

i have a question...

the 50/50 wipe down you refer to...
is that meaning 50/50 alcohol to soapywater

how much does this enhance look...

**Speedy_Gonzales** · 06-28-2007, 07:55 PM

nice work as always

**Z06-Goose** · 06-28-2007, 08:36 PM

Originally Posted by ls1speedster

i have a question...

the 50/50 wipe down you refer to...
is that meaning 50/50 alcohol to soapywater

how much does this enhance look...

50/50 is a mix of IPA and water (Isopropyl Alcohol and Water)
This is just to clean up after a polish to remove oils, and see your surface better, also to prep the finish to the next step. It doesn't enhance the looks, it just makes a better surface (cleaner)

**ls1speedster** · 06-29-2007, 08:49 AM

thanks goose..

i may gather all my materials and then do mine...

**SAGGIN** · 06-29-2007, 09:09 AM

Nice work.

**28Marcos** · 07-03-2007, 07:57 PM

Can I make a reservation? jk
Good job!

**Mr. Luos** · 07-03-2007, 09:23 PM

Pft....

Weak.

**Z06-Goose** · 07-03-2007, 09:40 PM

Originally Posted by slowagon

Masking tape!!! Ingenious! I would have never thought of that without seeing it. I always have problems with keeping wax/polish off my trim. Never again. Man thanks a million!! BTW great job on the Mustang your work is incredible.

Haha!! The masking tape use, is actually pretty common in detailing. I rarely use it, unless I'm working on a car with lots of plastic and rubber trim bordering the paint. It works great though. Get it from 3M