best way to remove decals?

[1 RedHot TransAm]

ram air stickers are a little warn out and I want to replace them anyone know the best way to safely remove the decals?? thanks for any input guys...

-Jason

[jperkins812]

When I took my decals off my bike I used a hair dryer to warm up the decals and a small bondo spreader to take them off.

[GULLETT17]

When I took my decals off my bike I used a hair dryer to warm up the decals and a small bondo spreader to take them off.

exactly what id suggest

[Weston_24]

Yea heat and then use some Goo Gone or rubbing alcohol before you put the new ones on

[Fury_786]

heat is a must, you can usually use your fingernail to get them off, and a little oops or goo gone to remove the left over glue.

[tiny47]

My ram air stickers were in bad shape too. Before you start, put down masking tape to mark the exact location of the old stickers. I would use a heat gun or hair dryer and just pull them off with your fingers. Clean and let dry before you put the new ones on.

[GULLETT17]

My ram air stickers were in bad shape too. Before you start, put down masking tape to mark the exact location of the old stickers. I would use a heat gun or hair dryer and just pull them off with your fingers. Clean and let dry before you put the new ones on.

good thinkin on the tape. . . i'm thinkin tss needs to make ram air badges it would look a lot better than decals

[tiny47]

I got mine off ebay... They seemed to be very good quality.

[2001somws6]

I used wd40 and my finger nail. I also use tape to mark the spot.

[tiny47]

This is exactly how I did mine...

One of my favorite colors too.

[decalremover]

Just a tip for when you remove decals or stickers, a cheap and chemical free product to remove the adhesive is Eucalyptus oil. Its from an australia tree and works well. There is also a website that has two products designed to remove decals and stickers (the site is www.decalstickerremover.com)