This is a discussion on Swi-x within the Stereo and Electronics forums, part of the General Help category; Could someone help me with the wiring of the steering wheel control? I did a search and saw that it ...
04-29-2006, 09:56 AM #1
Could someone help me with the wiring of the steering wheel control? I did a search and saw that it only 3 wires ... ground/ remote and a dark blue wire on the back side of the radio.... is this the same for Trans Am and if so any pics of install ??
Thanks in advance
Mark99 WS6 Trans AM
Aftermarket Throttle Body
KN Air Filter
Strut Tower Brace
04-29-2006, 10:50 AM #2
- Join Date
- Jul 2005
- OHIO Go Buckeyes!
- '07 Trailblazer LT
That's correct. The dark blue wire at pin 14 of the HU harness is the steering wheel control wire. I'm using one in my '99 TA Don't have any pix of the wiring though.
Monsoon HU Pin Out
C1-1 Grey 118 Left Front output +
C1-2 Tan 201 Left Front output -
C1-3 Dark Green 117 Right Front output -
C1-4 Light Green 200 Right Front output +
C1-5 Black 650 Ground
C1-6 Brown S226 Night Illumination input 12V
C1-7 Grey S224 Night Illumination, dimmed
C1-9 Yellow S218 / 43 Ignition input (ACCY,RUN,RAP) 12V
C1-10 Orange S211 / 640 Battery 12V
C2 CD Changer Control
C3-14 Dark Blue 1796 Steering wheel controls (Pontiac only)
C3-17 Light Blue S301 Right Rear output -
C3-18 Dark Blue S300 Right Rear output +
C3-19 Yellow S302 Left Rear output -
C3-20 Brown S305 Left Rear output +The White Rascal SOLD
Crank up the drums, crank up the bass,
Crank up my Les Paul in your face!
04-29-2006, 10:58 AM #3Originally Posted by White Rascal
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)